1.99 See Answer

Question: Following are 10 key internal controls in

Following are 10 key internal controls in the payroll cycle for Gilman Stores, Inc.
Key Controls
1. To input hours worked, payroll accounting personnel input the employee's Social Security number. The system does not allow input of hours worked for invalid employee numbers.
2. The payroll application is programmed so that only human resource personnel are able to add employee names to the employee master files.
3. Input menus distinguish executive payroll, administrative payroll, and factory payroll.
4. The system automatically computes pay at time and a half once hours worked exceed 80 in a 2-week pay period.
5. The system accumulates totals each pay period of employee checks processed and debits the payroll expense general ledger account for the total amount.
6. Each pay period, payroll accounting clerks count the number of time cards submitted by department heads for processing and compare that total with the number of checks printed by the system to ensure that each time card has a check.
7. For factory personnel, the payroll system matches employee ID numbers with ID numbers listed on job costing tickets as direct labor per the cost accounting system.
The purpose of the reconciliation is to verify that the amount paid to each employee matches the amount charged to production during the time period.
8. The system generates a listing by employee name of checks processed. Department heads review these listings to ensure that each employee actually worked during the pay period.
9. On a test basis, payroll accounting personnel obtain a listing of pay rates and withholding information for a sample of employees from human resources to recalculate gross and net pay.
10. The system automatically rejects processing an employee's pay if inputted hours exceed 160 hours for a 2-week pay period.
For each control:

a. Identify whether the control is an automated application control (AC) or a manual control done by Gilman employees (MC).
b. Identify the transaction-related audit objective that is affected by the control.
c. Identify which controls, if tested within the last two prior year audits, would not have to be retested in the current year, assuming there are effective IT general controls and no changes to the noted control have been made since auditor testing was completed.

> Beds and Spreads, Inc. specializes in bed and bath furnishings. Its inventory system is linked through the Internet to key suppliers. The auditor identified the following internal controls in the inventory cycle: 1. The computer initiates an order only w

> Assume that Rosanne Madden, CPA, is using 5% of net income before taxes, current assets, or current liabilities as her major guidelines for evaluating materiality. What qualitative factors should she also consider in deciding whether misstatements may be

> What is meant by planned detection risk? What is the effect on the amount of evidence the auditor must accumulate when planned detection risk is increased from medium to high?

> Distinguish among tests of details of balances, tests of controls, and substantive tests of transactions for the sales and collection cycle. Explain how the tests of controls and substantive tests of transactions affect the tests of details of balances.

> For this problem use the Metaphor-Trans-All file in ACL Demo, which is a file of outstanding sales invoices (each row represents an invoice transaction). The suggested command or other source of information needed to solve the problem requirement is incl

> BestSellers.com sells fiction and nonfiction books to customers through the company's Web site. Customers place orders for books via the Web site by providing their name, address, credit card number, and expiration date. What internal controls could Best

> You are auditing the sales and collection cycle for the Smalltown Regional Hospital, a small not-for-profit hospital. The hospital has a reputation for excellent medical services and deficient record keeping. The medical people have a tradition of doing

> In the confirmation of accounts receivable for the Reliable Service Company, 85 positive and no negative confirmations were mailed to customers. This represents 35% of the dollar balance of the total accounts receivable. Second requests were sent for all

> Frank James, a highly competent employee of Brinkwater Sales Corporation, had been responsible for accounting-related matters for two decades. His devotion to the firm and his duties had always been exceptional, and over the years, he had been given incr

> For each of the following, give an example of a physical control the client can use to protect the asset or record: 1. Petty cash 2. Cash received by retail clerks 3. Accounts receivable records 4. Raw material inventory 5. Perishable tools 6. Manufac

> State what is meant by a representative sample and explain its importance in sampling audit populations.

> Explain why the analysis of differences is important in the confirmation of accounts receivable, even if the misstatements in the sample are not material.

> Explain why you agree or disagree with the following statement: "In most audits, it is more important to test carefully the cutoff for sales than for cash receipts." Describe how you perform each type of test, assuming documents are prenumbered.

> Distinguish a significant deficiency in internal control from a material weakness in internal control. How will the presence of one significant deficiency affect an auditor's report on internal control under PCAOB standards? How will the presence of one

> The separation of operational responsibility from record keeping is meant to prevent different types of misstatements than the separation of the custody of assets from accounting. Explain the difference in the purposes of these two types of separation of

> The Securities and Exchange Commission (SEC) found that Bally Total Fitness Holding Corporation, a nationwide commercial operator of fitness centers, fraudulently accounted for three types of revenues it received from members. The SEC also charged the au

> The engagement partner agreed with Sessions’ recommended approach. In planning the audit evidence for detailed inventory tests, the audit risk model was applied with the following results: TDR = AAR/IR x CR x APR Where: TDR = test of details risk AAR = a

> Establishing materiality and allocation of materiality to individual accounts requires considerable judgment. Access Microsoft’s 2009 financial statements at www.microsoft.com (use the “investor relations” link). Required a. Assume that your firm’s mate

> Give examples of risk factors for misappropriation of assets for each of the three fraud conditions: incentives/pressures, opportunities, and attitudes/rationalization.

> Give examples of risk factors for fraudulent financial reporting for each of the three fraud conditions: incentives/pressures, opportunities, and attitudes/rationalization.

> The Art Appreciation Society operates a museum for the benefit and enjoyment of the community. When the museum is open to the public two clerks who are positioned at the entrance collect a $5.00 admission fee from each nonmember patron. Members of the Ar

> What are the three conditions of fraud often referred to as "the fraud triangle?"

> Distinguish fraudulent financial reporting from misappropriation of assets.

> SAS No. 99 requires auditors to conduct a brainstorming session to discuss the potential for fraud and how the auditor might respond to the risk of fraud. However, the standard provides limited guidance on how this brainstorming session should take place

> Define fraudulent financial reporting and give two examples that illustrate fraudulent financial reporting.

> Identify risks for accounting systems that rely heavily on IT functions.

> Explain how client internal controls can be improved through the proper installation of IT.

> The information systems (IS) department at Jacobsons Inc. consists of eight employees, including the IS Manager, Melinda Cullen. Melinda is responsible for the day-to-day oversight of the IS function and reports to Jacobsons' chief operating officer (COO

> Each year near the balance sheet date, when the president of Bargon Construction, Inc. takes a 3-week vacation to Hawaii, she signs several checks to pay major bills during the period she is absent. Jack Morgan, head bookkeeper for the company, uses this

> The Kowal Manufacturing Company employs about 50 production workers and has the following payroll procedures. The factory foreman interviews applicants and on the basis of the interview either hires or rejects them. When applicants are hired, they prepar

> Kent, CPA, is the engagement partner on the financial statement audit of Super Computer Services Co. (SCS) for the year ended April 30, 2011. On May 6, 2011, Smith, the senior auditor assigned to the engagement, had the following conversation with Kent c

> Appliances Repair and Service Company bills all customers rather than collecting in cash when services are provided. All mail is opened by Tom Gyders, treasurer. Gyders, a CPA, is the most qualified person in the company who is in the office daily. There

> The following questions concern the auditor's responses to the possibility of fraud. a. When fraud risk factors are identified during an audit the auditor's documentation should include b. If an independent audit leading to an opinion on financial statem

> The following questions address fraud risk factors and the assessment of fraud risk. a. Because of the risk of material misstatements due to fraud (fraud risk), an audit of financial statements in accordance with generally accepted auditing standards sho

> Name the three categories of inquiry and describe the purpose of each when used by an auditor to obtain additional information about a suspected fraud.

> The following misstatements are included in the accounting records of the Joyce Manufacturing Company: 1. A shipment to a customer was not billed because of the loss of the bill of lading. 2. A sales invoice was miscalculated by $1,000 as a result of a k

> You have identified a suspected fraud involving the company's controller. What must you do in response to this discovery? How might this discovery affect your report on internal control when auditing a public company?

> Distinguish management's responsibility from the audit committee's responsibility for designing and implementing antifraud programs and controls within a company.

> The proliferation of information technology (IT) has made governance of IT an important issue for businesses of all sizes and types, as well as their auditors. The IT Governance Institute has developed a wide range of resources for organizations, auditor

> Identify three verbal and three nonverbal cues that may be observed when making inquiries of an individual who is being deceitful.

> Describe the purpose of corporate codes of conduct and identify three examples of items addressed in a typical code of conduct.

> Auditors are required to make inquiries of individuals in the company when gathering information to assess fraud risk. Identify those with whom the auditor must make inquiries.

> The following audit procedures are included in the audit program because of heightened risks of material misstatements due to fraud. 1. Use audit software to search cash disbursement master files for missing check numbers. 2. Search the accounts receivab

> What should the audit team consider in its planning discussion about fraud risks?

> What sources are used by the auditor to gather information to assess fraud risks?

> How does the use of a database management system affect risks?

> Based on a cost-benefit analysis, management at First Community Bank decided to contract with Technology Solutions, a local data center operator, to host all of the bank's financial reporting applications. To avoid the significant costs of developing and

> Parts for Wheels, Inc. has historically sold auto parts directly to consumers through its retail stores. Due to competitive pressure, Parts for Wheels installed an Internet-based sales system that allows customers to place orders through the company's We

> Your new audit client, Hardwood Lumber Company, has a computerized accounting system for all financial statement cycles. During planning, you visited with the information systems vice president and learned that personnel in information systems are assign

> Assessing the risk of fraud in a financial statement audit is a difficult audit judgment. Auditing standards require the auditor to perform several audit procedures to accumulate information to assess the risk of fraud. You are the in-charge auditor resp

> One of the firm's audit partners, Alice Goodwin, just had lunch with a good friend, Sara Hitchcock, who is president of Granger Container Corporation. Granger Container Corp. is a fast-growing company that has been in business for only a few years. Durin

> A CPA’s client, Boos & Baumkirchner, Inc., is a medium-size manufacturer of products for the leisure-time activities market (camping equipment, scuba gear, bows and arrows, and so forth). During the past year, a computer system was installed and inventor

> You are conducting an audit of sales for the James Department Store, a retail chain store with a computer-based sales system in which computer-based cash registers are integrated directly with accounts receivable, sales, perpetual inventory records, and

> During your audit of Wilcoxon Sports, Inc., a retail chain of stores, you learn that a programmer made an unauthorized change to the sales application program even though no work on that application had been approved by IT management. In order for the sa

> The following are various potential frauds in the sales and collection cycle: 1. The company engaged in channel stuffing by shipping goods to customers that had not been ordered. 2. The allowance for doubtful accounts was understated because the company

> The Meyers Pharmaceutical Company has the following system for billing and recording accounts receivable: 1. An incoming customer's purchase order is received in the order department by a clerk who prepares a prenumbered company sales order on which the

> You go through the drive-through window of a fast food restaurant and notice a sign that reads "your meal is free if we fail to give you a receipt." Why would the restaurant post this sign?

> You are doing the audit of Phelps College, a private school with approximately 2,500 students. With your firm's consultation, they have instituted an IT system that separates the responsibilities of the computer operator, systems analyst, librarian, prog

> The following are misstatements that can occur in the sales and collection cycle: 1. A customer number on a sales invoice was transposed and, as a result, charged to the wrong customer. By the time the error was found, the original customer was no longer

> The following questions concern auditing complex IT systems. Choose the best response. a. Which of the following client IT systems generally can be audited without examining or directly testing the computer programs of the system? (1) A system that perf

> The following questions concern the characteristics of IT systems. Choose the best response. a. Effective management of information technologies in an organization embraces the viewpoint that (1) Most technologies reduce existing risk conditions. (2) Te

> During audit planning, an auditor obtained the following information: 1. Management has a strong interest in employing inappropriate means to minimize reported earnings for tax-motivated reasons. 2. The company's board of directors includes a majority of

> Your client has outsourced the majority of the accounting information system to a third-party data center. What impact would that have on your audit of the financial statements?

> Describe risks that are associated with purchasing software to be installed on desktop computer hard drives. What precautions can clients take to reduce those risks?

> Explain what is meant by the test data approach. What are the major difficulties with using this approach? Define parallel simulation with audit software and provide an example of how it can be used to test a client's payroll system.

> The following are activities that occurred at Franklin Manufacturing, a nonpublic company. 1. Franklin's accountant did not record checks written in the last few days of the year until the next accounting period to avoid a negative cash balance in the fi

> Explain what is meant by auditing around the computer and describe what must be present for this approach to be effective when auditing clients who use IT to process accounting information.

> Explain the relationship between application controls and transaction-related audit objectives.

> Explain how the effectiveness of general controls affects the auditor's tests of automated application controls, including the auditor's ability to rely on tests done in prior audits.

> An audit client is in the process of creating an online Web-based sales ordering system for customers to purchase products using personal credit cards for payment. Identify three risks related to an online sales system that management should consider. Fo

> Identify the typical duties within an IT function and describe how those duties should be segregated among IT personnel.

> Distinguish between general controls and application controls and give two examples of each.

> Identify the traditionally segregated duties in noncomplex IT systems and explain how increases in the complexity of the IT function affect that separation.

> The following questions address fraud risks in specific audit areas and accounts. a. Cash receipts from sales on account have been misappropriated. Which of the following acts will conceal this embezzlement and be least likely to be detected by the audit

> Distinguish between random error resulting from manual processing and systematic error resulting from IT processing and give an example of each category of error.

> Define what is meant by an audit trail and explain how it can be affected by the client's integration of IT.

> Compare the risks associated with network systems to those associated with centralized IT functions.

> The sampling data sheet below is missing selected information for six attributes involving tests of transactions for the sales and collection cycle. a. Use Table 15-8and Table 15-9 to complete the missing information for each attribute. Table 15-8 Table

> For the audit of the financial statements of Mercury Fifo Company, Stella Mason, CPA, has decided to apply nonstatistical audit sampling in the tests of controls and substantive tests of transactions for sales transactions. Based on her knowledge of Merc

> Describe systematic sample selection and explain how an auditor will select 40 numbers from a population of 2,800 items using this approach. What are the advantages and disadvantages of systematic sample selection?

> The questions below relate to determining the CUER in audit sampling for tests of controls, using the following table: Required a. Calculate SER for each of columns 1 through 4 and use this to calculate the actual allowance for sampling risk. b. Explai

> The following are auditor judgments and attributes sampling results for six populations. Assume large population sizes. Required a. For each population, did the auditor select a smaller sample size than is indicated by using the attributes sampling table

> The questions below relate to determining the CUER in audit sampling for tests of controls, using the following table: Required a. Using nonstatistical sampling, calculate TER – SER for each of columns 1 through 8 and evaluate whether

> The following questions concern the determination of the proper sample size in audit sampling using the following table: Required a. Assume that the initial sample size for column 1 using nonstatistical sampling is 90 items. For each of columns 2 through

> The following is a partial audit program for the audit of sales transactions. 1. Foot the sales journal for one month and trace the postings to the general ledger. 2. Vouch entries in sales journal to sales invoice and shipping document. 3. Review the sa

> Lenter Supply Company is a medium-sized distributor of wholesale hardware supplies in the central Ohio area. It has been a client of yours for several years and has instituted excellent internal controls for sales at your recommendation. In providing con

> a. In each of the following independent problems, design an unbiased random sampling plan, using an electronic spreadsheet or a random number generator program. The plan should include defining the sampling unit and establishing a numbering system for th

> The following questions concern sampling for attributes. Choose the best response. a. An advantage of statistical sampling over nonstatistical sampling is that statistical sampling helps an auditor (1) Minimize the failure to detect errors and fraud. (2

> The following items concern determining exception rates using random sampling from large populations using attributes sampling. Select the best response. a. From a random sample of items listed from a client's inventory count, an auditor estimates with a

> The following items apply to determining sample sizes using random sampling from large populations for attributes sampling. Select the most appropriate response for each question. a. If all other factors specified in a sampling plan remain constant, chan

> What are the two types of simple random sample selection methods? Which of the two methods is used most often by auditors and why?

> List the major decisions that the auditor must make in using attributes sampling. State the most important considerations involved in making each decision.

> Distinguish between probabilistic selection and statistical measurement. State the circumstances under which one can be used without the other.

> When the CUER exceeds the TER, what courses of action are available to the auditor? Under what circumstances should each of these be followed?

> Explain what is meant by analysis of exceptions and discuss its importance.

> Assume that the auditor has selected 100 sales invoices from a population of 100,000 to test for an indication of internal verification of pricing and extensions. Determine the CUER at a 10% ARACR if four exceptions are found in the sample using attribut

> This problem requires the use of ACL software, which is included in the CD attached to the text. Information about installing and using ACL and solving this problem can be found in Appendix, pages 838-842. You should read all of the reference material, e

> You have just completed the accounts receivable confirmation process in the audit of Danforth Paper Company, a paper supplier to retail shops and commercial users. Following are the data related to this process: Accounts receivable recorded balance $

> You are doing the audit of Peckinpah Tire and Parts, a wholesale auto parts company. You have decided to use monetary unit sampling (MUS) for the audit of accounts receivable and inventory. The following are the recorded balances: Accounts receivable

> Marjorie Jorgenson, CPA, is verifying the accuracy of outstanding accounts payable for Marygold Hardware, a large, single-location retail hardware store. There are 650 vendors listed on the outstanding accounts payable list. She has eliminated from the p


See Answer