2.99 See Answer

Question: Preble Company manufactures one product. Its

Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows:
Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows:


Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows:


Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows:





Transcribed Image Text:

Direct material: 5 pounds at $9.00 per pound $ 45.00 Direct labor: 3 hours at $14 per hour Variable overhead: 3 hours at $9 per hour 42.00 27.00 Total standard variable cost per unit $114.00 The company also established the following cost formulas for its selling expenses: Variable Cost per Unit Sold Fixed Cost Advertising Sales salaries and commissions per Month $ 300,000 $ 300,000 $22.00 $13.00 Shipping expenses The planning budget for March was based on producing and selling 20,000 units. However, during March the company actually produced and sold 24,800 units and incurred the following costs: a. Purchased 155,000 pounds of raw materials at a cost of $7.20 per pound. All of this material was used in production. b. Direct-laborers worked 65,000 hours at a rate of $15.00 per hour. c. Total variable manufacturing overhead for the month was $612,300. d. Total advertising, sales salaries and commissions, and shipping expenses were $303,000, $505,000, and $215,000, respectively. 11. What is the variable overhead rate variance for March? (Indicate the effect of each variance by selecting "F" for favorable, "U" for unfavorable, and "None" for no effect (i.e., zero variance.). Input the amount as a positive value.) |S 84,600 U Variable overhead rate variance 12. What amounts of advertising, sales salaries and commissions, and shipping expenses would be included in the company's flexible budget for March? Answer is complete but not entirely correct. $ 300,000 O $ 300,000 O $ 868,000 Advertising Sales salaries and commissions Shipping expenses


> Differences in the feathering pattern in chickens is an example of: Select one: a. Sex influenced b. Sex-linked trait c. Codominant trait d. Sex-limited trait

> A trait that only occurs in one of the sexes is called a sex-limited trait sex-influenced trait dominant trait X-linked trait recessive trait

> What landforms are created by stream deposition (for physical geology)?

> Identify the muscles that perform each function Name three flexors of the shoulder Prime movers of shoulder adduction Prime mover of shoulder abduction Two prime movers of shoulder extension Used when shrugging the shoulders Two prime movers of elbo

> Consider the stacked vectors where a1,......,ak are n-vectors and b1,…..,bk are m-vectors. For each case, either prove or provide a counter example. ak Ci = (a) Suppose a1,.., a; are linearly independent (we make no assumptions ab

> a. a1. Define linear independence of vectors. (a2) Are the vectors u = and v = 2 linear independent?

> The 9th edition of a text cost $145.75 which is a 15% increase over the 8th edition of the text. How much did the 8th edition cost?

> (-32)^9/5 Please show work and if it's not a real number, please write it and explain why it isn't a real number.

> The roller-coaster car has a mass of 700 kg, including its passenger. If it is released from rest at the top of the hill A, Neglect friction, the mass of the wheels and the size of the car. What is the normal reaction on the car when the * ? car is at C

> Determine the radial and transverse components of its velocity and acceleration *12–156. For a short distance the train travels along a track having the shape of a spiral, r = (1000/0) m, where e is in radians. If the angular rate is constant, 0.2 ra

> The two dimensional motion of a particle is defined by the radial and transverse coordinates r = ro cos3 θ θ= βt a. Express the velocity in radial and transverse components when θ = 0 and θ = π/6. b. Express the acceleration in radial and transverse co

> F1 and F2 are the two focal points of the converging lens #1. F3 and F4 are the focal points of the converging lens #2. As shown in the figure, F1 and F3 overlap. The focal length of lens #1 is 30 cm. a. Complete the ray diagram in the figure to find th

> For the Dugoff's tire model, the parameters are given as μ = 09, FZ = 4500N, As = 0. Cx= 80000, Cy = 47275) 1. Simulate the Dugoff's tire model for both pure longitudinal and pure lateral force cases. Plot the tire longitudinal force vs. slip and latera

> What is the best argument to prove global warming to someone who isn't convinced it is real?

> Draw the shear diagram for the cantilevered beam. 100 lb 800 lb-ft A B -5 ft 5 ft V,lb 200- 100 x,ft 5 10 -100+ -200-

> Solve the following initial value problem. x* + 4y* – 4xy³. 0, y(1) = 2

> 7. Solve the following initial value problem. dy * 2x2 +y, y(1) = 3. %3D 8. Solve the following initial value problem. dy x2 + 2y y(1) = 2. dx

> Use the Laplace transform to solve the following initial value problem. Use the Laplace transform to solve the following initial value problem. y" + 2y + 5y = 0, y(0) = 2, y(0) = -1 %3D %3D %3D y" + 5y' + 6y = u3(t), y(0) = 1, y'(0) = 0 %3D %3D

> Problem 1. Find the general solution to Problem 2. Solve the following initial value problem: Problem 3. Solve the following initial value problem: y/ + (ry)? = y?e*. 3z (1+x)y' – 2ry = (1+ a?)?, y(1) = 6. %3D %3D dy 2ry? + (2r°y – cos(u)); y(1)

> Solve the following initial value problem. dy t>1 dt y/ – y = ty², y(1) = 1 € R, y = y(t), y/ = %3D

> Differential Equations First Order Linear 1. Solve the following initial value problem dy/dx - 2y = cos(-6x) y(0) = 6 2.Solve the following initial value problem dy/dx + 6y = -5exp(-8x) y(0) = 7 3. Solve the following initial value problem dy/dx + 4y

> 1. Solve the following initial value problem 2. Solve the following initial value problem dy + (0.6)ty = 3t dt With y(0) = 6. dy 9- +y = 63t dt %3D with y(0) = 9.

> Solve the following initial value problem: 3yy y(1) 1..

> Lindsay Electronics a small manufacturer of electronic research equipment has approximately 7300 items in its inventory and has hired Joan Blasco-Paul to manage its inventory Joan has determined that 12% of the items in inventory are A items, 33% are B i

> a. Define linear dependence and linear independence of a finite sequence. b. Determine if the following sequence of vectors is linearly dependent or of vectors. linearly independent. (2' Vi = 3 V2 = V3 = 1 2 231

> a. Define linear dependence and linear independence of a finite sequence of vectors. b. Determine if the following sequence of vectors is linearly dependent or linearly independent. () -() --€) Vị = V2 = V3 = 3 %3D

> Consider the following vector spaces and the three vectors there. For each case, prove either linear independence or linear dependence. 1. 2. The vector space V is all functions on (1, 00). The three elements of V are fi(x) =, f2(x) =, fa(x) =4 The

> Prove that the linear independence of n vectors in Rn is equivalent to invertibility. (Linear Algebra; linear independence)

> Evaluate the line integral. Evaluate S",(ti ej+ t'k)dt= 328.984971

> Evaluate the root without using a calculator, or note that the root isn't a real number. - √0.49 A. 0.7 B. -0.7 C. 0.2401 D. It's not a real number.

> Solve the following initial value problem: dy - 4у + 16 dt y(0) = 9 y(t) = ?

> Solve the following initial value problem: ty + y = t + 1, y(1) = 0 Solve the following initial value problem: dy + e*y = e", y(0) = 0 dx Solve the following initial value problem: dy + (tant)y = sec t, y(T/4) = 0 dt

> On March 10, 2017, Nash Company sold to Barr Hardware 160 tool sets at a price of $50 each (cost $30 per set) with terms of n/60, f.o.b. shipping point. Nash allows Barr to return any unused tool sets within 60 days of purchase. Nash estimates that 1. 1

> Use the following information to answer the questions below. Klein Interiors has the following account balances at the end of the year. Compute total assets to report on Balance Sheet: _______________ Compute total liabilities to report

> 1. Premium 2. Times interest earned ratio 3. Sinking fund 4. Market interest rate 5. Discount 6. Stated interest rate 7. Capital lease 8. Amortization schedule 9. Operating lease 10. Debt to equity ratio The rate quoted in the bond contract used to calc

> Listed below are five terms followed by a list of phrases that describe or phrase with the best term placing the number designating 1. Bonds issued at face value 2. Bonds issued at a discount 3. Stated interest rate 4. Bonds issued at a premium 5. Mark

> 14. Magnolia Company's Division A has operating income of $122,600 and assets of $303,800. The minimum acceptable return on investment is 11%. What is the residual income for the division? 15. Motorcycle Manufacturers, Inc., projected sales of 51,100 ma

> 5. The total manufacturing cost variance consists of a Direct materials price variance, direct labor cost variance, and fixed factory overhead volume variance b. Direct materials cost variance, direct labor rate variance, and factory overhead cost vari

> Match the following definitions with the terms below: Match the following definitions with the terms below: 45. The stated interest rate is more than the market interest rate. 46. The stated interest rate is less than the market interest rate. 47. Th

> 13. The amount of the factory overhead volume variance is: a. $2,000 favorable b. $2,500 unfavorable c. $2,000 unfavorable d. $0 The standard factory overhead rate is $10 per direct labor hour ($8 for variable factory overhead and $2 for fixed fa

> Introduction: Garcia and Foster, CPAs, is a regional firm with 20 offices located in large cities throughout the western United States. As part of its quality control procedures, the firm chooses 5 offices each year and conducts an internal inspection of

> Which one of the following is LEAST likely to be an objective of NFP reporting? A. Information should useful in evaluating services provided. B. Information should be useful in assessing management performance. C. Information should be useful for maki

> Which one of the following is least likely to be an objective of NFP reporting? A. Information should be useful in assessing whether the organization is in compliance with relevant laws. B. Information should useful in evaluating services provided. C. In

> Dorsey Company manufactures three products from a common input in a joint processing operation. Joint processing costs up to the split-off point total $91,000 per quarter. The company allocates these costs to the joint products on the basis of their rela

> Dorsey Company manufactures three products from a common input in a joint processing operation. Joint processing costs up to the split-off point total $95,000 per quarter. The company allocates these costs to the joint products on the basis of their rela

> Dorsey Company manufactures three products from a common input in a joint processing operation. Joint processing costs up to the split-off point total S92.000 per quarter. The company allocates these costs to the joint products on the basis of their rela

> Dorsey Company manufactures three products from a common input in a joint processing operation. Joint processing costs up to the split-off point total $98,000 per quarter. The company allocates these costs to the joint products on the basis of their rela

> 23. Target cost is comprised of total manufacturing and selling and administrative costs. variable manufacturing and selling and administrative costs only. fixed manufacturing and selling and administrative costs only variable and fixed manufacturing

> Target cost is comprised of variable and fixed manufacturing costs only. variable manufacturing and selling and administrative costs only. total manufacturing and selling and administrative costs. fixed manufacturing and selling and administrative costs

> On July 1, Shady Creek Resort borrowed $380,000 cash by signing a 10-year, 9% installment note requiring equal payments each June 30 of $59,212. What is the journal entry to record the first annual payment?

> On July 1, Shady Creek Resort borrowed $330,000 cash by signing a 10-year, 12% installment note requiring equal payments each June 30 of $58,405. What amount of interest expense will be included in the first annual payment?

> On July 1, Shady Creek Resort borrowed $280,000 cash by signing a 10-year, 9% installment note requiring equal payments each June 30 of $43,630. What is the journal entry to record the first annual payment?

> On July 1, Shady Creek Resort borrowed $410,000 cash by signing a 25-year, 16.0% installment note requiring equal payments each June 30 of $84,830. What amount of interest expense will be included in the first annual payment?

> On July 1, Shady Creek Resort borrowed $250,000 cash by signing a 10-year, 8% installment note requiring equal payments each June 30 of $37,258. What is the appropriate journal entry to record the issuance of the note?

> 27. Traditional manufacturing emphasizes all of the following except a. team oriented employee involvement b. process-oriented layout c. push manufacturing d. cost accumulation by department 28. Which of the following is characteristic of a lean pr

> McKeoun Enterprises is a large machine tool company now experiencing alarming increases in maintenance expense in each of its four production departments Maintenance costs are currently allocated to the production departments on the basis of direct labor

> Which of the following is characteristic of a lean production layout? Organization around processes and small production batches Decentralized maintenance and organization around processes Decentralized maintenance and small production batches Large prod

> Dorsey company manufactures three products from a common input in a joint processing operation. Dorsey can process its products further after the split-off point if: 1. If the incremental revenue of processing further is more than the incremental process

> Dorsey Company manufactures three products from a common input in a joint processing operation. Joint processing costs up to the split-off point total $97,000 per quarter. The company allocates these costs to the joint products on the basis of their rela

> Preble Company manufactures one product. Its variable manufacturing overhead is applied to production based on direct labor-hours and its standard cost card per unit is as follows: The company also established the following cost formulas for its selling

> When a petty cash fund is in use: A. Expenses paid with petty cash are recorded when the fund is replenished. B. Petty Cash is debited when funds are replenished. C. Petty Cash is credited when funds are replenished. D. Expenses are not recorded. E.

> When a petty cash fund is in use, A. all purchases using these funds must have two signatures to approve the purchases. B. the size of the fund should be large enough to use to cash employees' bi-monthly payroll checks. C. an entry is made to Petty Cash

> At each calendar year-end, Mazie Supply Co. uses the percent of accounts receivable method to estimate bad debts. On December 31, 2017, it has outstanding accounts receivable of $141,500, and it estimates that 3% will be uncollectible. Prepare the adjust

> At each calendar year-end, Mazie Supply Co. uses the percent of accounts receivable method to estimate bad debts. On December 31, 2017, it has outstanding accounts receivable of $82,000, and it estimates that 2% will be uncollectible. Prepare the adjusti

> At each calendar year-end, Mazie Supply Co. uses the percent of accounts receivable method to estimate bad debts. On December 31, 2015, it has outstanding accounts receivable of $145,000, and it estimates that 5% will be uncollectible. Prepare the adjust

> At each calendar year-end, Mazie Supply Co. uses the percent of accounts receivable method to estimate bad debts. On December 31, it has outstanding accounts receivable of $139,500, and it estimates that 5% will be uncollectible. Prepare the adjusting en

> At the end of its first year, the trial balance of Rayburn Company shows Equipment $ 22,000 and zero balances in Accumulated Depreciation—Equipment and Depreciation Expense. Depreciation for the year is estimated to be $ 2,750. Indicate

> The controllers of Larkspur, Inc. and Blue Corp. both ask you whether their companies can reclassify short-term obligations as long-term. Here are the facts surrounding both companies’ short-term debt. Larkspur, Inc. On December 31, 20

> On December 31, 2016, Sheridan Company had 1,400,000 shares of $6 par common stock issued and outstanding. At December 31, 2016, stockholders’ equity had the amounts listed here. Transactions during 2017 and other information related t

> On December 31, 2017, Buffalo Company had $1,211,000 of short-term debt in the form of notes payable due February 2, 2018. On January 21, 2018, the company issued 23,700 shares of its common stock for $46 per share, receiving $1,090,200 proceeds after br

> 25. In the New Heritage Doll Case, the principal financial theory Emily Harris relied upon in deciding between proposals from the Match My Doll Clothing and Design Your Own Doll divisions was A. Hedging Principal B. Capital Asset Pricing Model C. Net

> Prepare a partial balance sheet of Dent Balance Sheet. Brief Exercise 9-13 Information related to plant assets, natural resources, and intangibles at the end of 2015 for Dent Company is s folows: buildings ,015,400, accumulated depreciationbuldings s

> he controllers of Kingbird, Inc. and Ayayai Corp. both ask you whether their companies can reclassify short-term obligations as long-term. Here are the facts surrounding both companies’ short-term debt. Kingbird, Inc. On December 31, 2

> The controllers of Larkspur, Inc. and Blue Corp. both ask you whether their companies can reclassify short-term obligations as long-term. Here are the facts surrounding both companies’ short-term debt. Larkspur, Inc. On December 31, 20

> Tony and Suzie are ready to expand Great Adventures even further in 2019. Tony believes that many groups in the community (for example, Boy Scouts, church groups, civic groups, and local businesses) would like to hold one-day outings for their members. G

> On January 1, 2022, Sage Hill Inc. had these stockholders’ equity balances. Common Stock, $1 par (2,500,000 shares authorized, 660,000 shares issued and outstanding) $660,000 Paid-in Capital in Excess of Par Value 1,440,000 Retained Ear

> The following stockholders’ equity accounts, arranged alphabetically, are in the ledger of Eudaley Corporation at December 31, 2017. Prepare the stockholders’ equity section of the balance sheet at December 31, 2017.

> Riverbed Corp has been authorized to issue 20,300 shares of $100 par value, 6%, noncumulative preferred stock and 1,130,000 shares of no-par common stock. The corporation assigned a $5 stated value to the common stock. At December 31, 2017, the ledger c

> The following stockholders’ equity accounts, arranged alphabetically, are in the ledger of Sheffield Corp. at December 31, 2017. Common Stock ($4 stated value) $2,480,000 Paid-in Capital in Excess of Par Value—Preferre

> On January 1, 2017, Ven Corporation had the following stockholders’ equity accounts. During the year, the following transactions occurred. (Enter account name only and do not provide descriptive information. Round answers to 0 decimal

> The following accounts appear in the ledger of Tamarisk, Inc. after the books are closed at December 31, 2017. Prepare the stockholders’ equity section at December 31, assuming $100,000 of retained earnings is restricted for plant expa

> Key facts about New Heritage Doll Company.

> Seen in RAID 5, _____________ uses at least three drives and combines the best features of disk mirroring and disk striping.

> The ________________ specification supports a communication connection between the operating system and the SSD directly through a PCIe bus lane, reducing latency and taking full advantage of the wicked-fast speeds of high-end SSDs.

> _____________________ is an internal drive program that tracks errors and error conditions within a drive.

> Windows supports _______________ , drives that combine flash memory and spinning platters to provide fast and reliable storage.

> The older PATA drives send data in parallel; current ___________ drives send data in serial.

> A _____________ form factor drive installs into a special slot on motherboards.

> A ___________ offers substantial performance benefits over an HDD.

> Traditional hard drives run at a set __________ , measured in RPM.

> __________ features both nesting and striping and requires at least four drives.

> Traditional hard drives with spinning metal disks are known as ____________ .

> The ___________ utility is useful for purging your system of unnecessary temporary files.

> The ability to split voltage supplies into separate __________ ensures that no device will hog all of the available power.

> Be sure the __________ rating for your power supply is greater than the minimum required by all devices in the computer.

> The ____________ provides the basic cooling for the PC.

> The measurement unit for the amount of electrons flowing past a certain point on a wire is ____________ .

> Be sure your surge suppressor has a ________ rating of at least 2000.

> An ATX form factor power supply attaches to the motherboard with a __________ and a P4 connector, and supplies 5 V to the motherboard at all times.

> If the _________ are left off the expansion slots, the computer may overheat.

2.99

See Answer