4.99 See Answer

Question: Sunto Scientific manufactures GPS devices for a

Sunto Scientific manufactures GPS devices for a chain of retail stores. Its most popular model, the Magellan XS, is assembled in a dedicated facility in Savannah, Georgia. Sunto is keenly aware of the competitive threat from smartphones that use Google Maps and has put in a standard cost system to manage production of the Magellan XS. It has also implemented a just-in-time system so the Savannah facility operates with no inventory of any kind. Producing the Magellan XS involves combining a navigation system (imported from Sunto’s plant in Dresden at a fixed price), an LCD screen made of polarized glass, and a casing developed from specialty plastic. The budgeted and actual amounts for Magellan XS for July 2017 were as follows:
Sunto Scientific manufactures GPS devices for a chain of retail stores. Its most popular model, the Magellan XS, is assembled in a dedicated facility in Savannah, Georgia. Sunto is keenly aware of the competitive threat from smartphones that use Google Maps and has put in a standard cost system to manage production of the Magellan XS. It has also implemented a just-in-time system so the Savannah facility operates with no inventory of any kind. 
Producing the Magellan XS involves combining a navigation system (imported from Sunto’s plant in Dresden at a fixed price), an LCD screen made of polarized glass, and a casing developed from specialty plastic. The budgeted and actual amounts for Magellan XS for July 2017 were as follows:

The controller of the Savannah plant, Jim Williams, is disappointed with the standard costing system in place. The standards were developed on the basis of a study done by an outside consultant at the start of the year. Williams points out that he has rarely seen a significant unfavorable variance under this system. He observes that even at the present level of output, workers seem to have a substantial amount of idle time. Moreover, he is concerned that the production supervisor, John Kelso, is aware of the issue but is unwilling to tighten the standards because the current lenient benchmarks make his performance look good. 
Required:
1. Compute the price and efficiency variances for the three categories of direct materials and for direct manufacturing labor in July 2017. 
2. Describe the types of actions the employees at the Savannah plant may have taken to reduce the accuracy of the standards set by the outside consultant. Why would employees take those actions? Is this behavior ethical? 
3. If Williams does nothing about the standard costs, will his behavior violate any of the standards of ethical conduct for practitioners described in the IMA Statement of Ethical Professional Practice (see Exhibit 1-7 on page 17)? 
4. What actions should Williams take? 
5. Williams can obtain benchmarking information about the estimated costs of Sunto’s competitors such as Garmin and TomTom from the Competitive Intelligence Institute (CII). Discuss the pros and cons of using the CII information to compute the variances in requirement 1.

The controller of the Savannah plant, Jim Williams, is disappointed with the standard costing system in place. The standards were developed on the basis of a study done by an outside consultant at the start of the year. Williams points out that he has rarely seen a significant unfavorable variance under this system. He observes that even at the present level of output, workers seem to have a substantial amount of idle time. Moreover, he is concerned that the production supervisor, John Kelso, is aware of the issue but is unwilling to tighten the standards because the current lenient benchmarks make his performance look good. Required: 1. Compute the price and efficiency variances for the three categories of direct materials and for direct manufacturing labor in July 2017. 2. Describe the types of actions the employees at the Savannah plant may have taken to reduce the accuracy of the standards set by the outside consultant. Why would employees take those actions? Is this behavior ethical? 3. If Williams does nothing about the standard costs, will his behavior violate any of the standards of ethical conduct for practitioners described in the IMA Statement of Ethical Professional Practice (see Exhibit 1-7 on page 17)? 4. What actions should Williams take? 5. Williams can obtain benchmarking information about the estimated costs of Sunto’s competitors such as Garmin and TomTom from the Competitive Intelligence Institute (CII). Discuss the pros and cons of using the CII information to compute the variances in requirement 1.





Transcribed Image Text:

Budgeted Amounts Actual Amounts 4,400 Magellan XS units produced Navigation systems cost Navigation systems Polarized glass cost Sheets of polarized glass used Plastic casing cost Ounces of specialty plastic used Direct manufacturing labor costs Direct manufacturing labor-hours 4,000 $81,600 4,080 $40,000 $89,000 4,450 S40,300 800 816 $12,000 4,000 $36,000 2,000 $12,500 4,250 $37,200 2,040



> Gomez Company sells electrical supplies on a wholesale basis. The balances of the accounts as of April 1 have been recorded in the general ledger in your Working Papers and CengageNow. The following transactions took place during April of this year: Apr.

> Refer to the information for Problem 10-1A. In Problem 10-1A The following transactions were completed by Hammond Auto Supply during January, which is the first month of this fiscal year. Terms of sale are 2/10, n/30. The balances of the accounts as of

> Use the information in Problem A-1 to solve this problem. Assume that the van is five-year property for tax purposes. In Problem A-1 A delivery van was bought for $18,000. The estimated life of the van is four years. The trade-in value at the end of fou

> Why is an accounts receivable ledger or an accounts payable ledger necessary for a business with large numbers of credit customers or large numbers of vendors/suppliers?

> Shirley’s Beauty Store records sales and purchase transactions in the general journal. In addition to a general ledger, Shirley’s Beauty Store also uses an accounts receivable ledger and an accounts payable ledger. Transactions for January related to the

> Berry’s Pet Store records purchase transactions in the general journal. The company is located in Boston, Massachusetts. In addition to a general ledger, Berry’s Pet Store also uses an accounts payable ledger. Transactions for April related to the purcha

> Abbott Florists sells flowers on a retail basis. Most of the sales are for cash; however, a few steady customers have credit accounts. Abbott’s sales staff fills out a sales slip for each sale. There is a state retail tax of 5 percent, which is collected

> Bean Nursery sells bark to its customers at retail. Bean buys bark from a plywood mill in bulk and transports the bark in its own trucks. Information relating to the beginning inventory and purchases of bark is as follows: Beginning inventory ………………. 1,

> Record general journal entries to correct the errors described below. Assume that the incorrect entries were posted in the same period in which the errors occurred and were recorded using the periodic inventory system. a. A freight cost of $85 incurred o

> Record the following transactions in general journal form on the books of the seller (Fuentes Company) and then on the books of the buyer (Lowe Company) using the periodic inventory system. Fuentes Company a. Sold merchandise on account to Lowe Company,

> Record the following transactions in general journal form using the periodic inventory system: June 5 Sold merchandise on account to Wilson, Inc., $520; terms 1/10, n/30. 12 Bought merchandise on account from Mastercraft Company, $425; terms 2/10, n/45;

> Describe the transactions recorded in the following T accounts: Cash Accounts Payable Purchases (c) 1,176 (b) 150 | (a) 1,350 (a) 1,350 (c) 1,200 Purchases Returns and Allowances Purchases Discounts (b) 150 (c) 24

> Describe the transactions recorded in the following T accounts: Cash Accounts Receivable Sales (c) 5,042.10 (a) 5,320 (b) 175 (a) 5,320 (c) 5,145 Sales Returns and Allowances Sales Discounts (b) 175 (c) 102.90

> Indicate the journal in which each of the following transactions should be recorded. Assume a three-column purchases journal. Journal Transaction P CR | CP J a. Paid a creditor on account. b. Bought merchandise on account. c. Sold merchandise for ca

> What is the purpose of each of the following? a. Schedule of accounts receivable b. Schedule of accounts payable

> Use the information in Problem A-1 to solve this problem. In Problem A-1 A delivery van was bought for $18,000. The estimated life of the van is four years. The trade-in value at the end of four years is estimated to be $2,000. Required Prepare a sched

> For the following purchases of merchandise, determine the amount of cash to be paid: Total Credit Amount of Рurchase Freight Charges Invoice Invoice Returns and Date Purchase Date Terms FOB Amount Allowances Pald June 1 2/10, n/30 Destination $550 $

> Kelley Company has completed the following October sales and purchases journals: a. Total and post the journals to T accounts for the general ledger and the accounts receivable and accounts payable ledgers. b. Complete a schedule of accounts receivable f

> Williams Corporation had the following purchases for May: May 3 Bought ten lawn rakes from Owens Company, invoice no. J34Y9, $250.25; terms net 15 days; dated May 1; FOB shipping point, freight prepaid and added to the invoice, $15 (total $265.25). 11 Bo

> Toby Company had the following sales transactions for March: Mar. 6 Sold merchandise on account to Osbourne, Inc., invoice no. 1128, $563.17. 14 Sold merchandise on account to Ortiz Company, invoice no. 1129, $823.50. 20 Sold merchandise on account to Ba

> Record the following transactions for a perpetual inventory system in general journal form. a. Sold merchandise on account to Southridge Manufacturing, Inc., invoice no. 6910, $1,815.24. The cost of merchandise was $1,320. b. Issued credit memorandum no.

> Record the following transactions in general journal form for Ford Education Outfitters and Romero Textbooks, Inc. a. Ford Educational Outfitters bought merchandise on account from Romero Textbooks, Inc., invoice no. 10594, $1,875.34; terms net 30 days;

> Post the following entry to the general ledger and the subsidiary ledger. GENERAL JOURNAL Page 92 Post. Date Description Ref. Debit Credit 20-- Sept. 15 Accounts Payable, Jensen and Silva 291 50 Purchases Returns and Allowances 2 9 1 50 Credit memo

> Journalize the following transactions in general journal form. a. Bought merchandise on account from Brewer, Inc., invoice no. B2997, $914; terms net 30 days; FOB destination. b. Received credit memo no. 96 from Brewer, Inc., for merchandise returned, $2

> Record the following transactions in general journal form. a. Sold merchandise on account to A. Bauer, $680 plus $54.40 sales tax (invoice no. D446). b. Bauer returned $105.50 of the merchandise. Issued credit memo no. 114 for $113.94 ($105.50 for the am

> What is the difference between a cash discount and a trade discount?

> What is the difference between a periodic inventory system and a perpetual inventory system?

> Describe the posting procedure for a cash payments journal with an Other Accounts Debit column and several special columns, including an Accounts Payable Debit column.

> Describe the procedure for posting each of the following: a. From the sales journal to the accounts receivable ledger b. From the purchases journal to the accounts payable ledger

> Dawson Co. produces wine. The company expects to produce 2,535,000 two-liter bottles of Chablis in 2018. Dawson purchases empty glass bottles from an outside vendor. Its target ending inventory of such bottles is 77,000; its beginning inventory is 54,000

> The Coby Company expects sales in 2018 of 201,000 units of serving trays. Coby’s beginning inventory for 2018 is 13,000 trays, and its target ending inventory is 29,000 trays. Compute the number of trays budgeted for production in 2018.

> Raynham’s Radiology Center (RRC) performs X-rays, ultrasounds, computer tomography (CT) scans, and magnetic resonance imaging (MRI). RRC has developed a reputation as a top radiology center in the state. RRC has achieved this status bec

> Market Pulse performs market research for consumer product companies across the country. The company conducts telephone surveys and gathers consumers together in focus groups to review foods, cleaning products, and toiletries. Market Pulse uses a normal-

> Joseph Underwood joined Anderson Enterprises as controller in October 2016. Anderson Enterprises manufactures and installs home greenhouses. The company uses a normal-costing system with two direct-cost pools, direct materials and direct manufacturing la

> Resource Room prints custom training material for corporations. The business was started January 1, 2017. The company uses a normal-costing system. It has two direct-cost pools, materials and labor, and one indirect-cost pool, overhead. Overhead is charg

> Estevez Company uses normal costing in its job-costing system. The company produces kitchen cabinets. The beginning balances (December 1) and ending balances (as of December 30) in their inventory accounts are as follows: Additional information follows:

> Keezel Company uses normal costing in its job-costing system. Partially completed T-accounts and additional information for Keezel for 2017 are as follows: Additional information follows: a. Direct manufacturing labor wage rate was $15 per hour. b. Ma

> Adventure Designs makes custom backyard play structures that it sells to dealers across the Midwest. The play structures are produced in two departments, fabrication (a mostly automated department) and custom finishing (a mostly manual department). The c

> Gardi Manufacturing uses normal costing for its job-costing system, which has two direct-cost categories (direct materials and direct manufacturing labor) and one indirect-cost category (manufacturing overhead). The following information is obtained for

> The Zaf Radiator Company uses a normal-costing system with a single manufacturing overhead cost pool and machine-hours as the cost-allocation base. The following data are for 2017: Budgeted manufacturing overhead costs…â€&b

> Kidman has just completed a review of its job-costing system. This review included a detailed analysis of how past jobs used the firm’s resources and interviews with personnel about what factors drive the level of indirect costs. Manage

> “Managers should always buy inventory in quantities that result in the lowest purchase cost per unit.” Do you agree? Why?

> Kidman & Associates is a law firm specializing in labor relations and employee-related work. It employs 30 professionals (5 partners and 25 associates) who work directly with its clients. The average budgeted total compensation per professional for 2017

> The Solomon Company uses a job-costing system at its Dover, Delaware, plant. The plant has a machining department and a finishing department. Solomon uses normal costing with two direct-cost categories (direct materials and direct manufacturing labor) an

> LawnCare USA provides lawn care and landscaping services to commercial clients. LawnCare USA uses activity-based costing to bid on jobs and to evaluate their profitability. LawnCare USA reports the following budgeted annual costs: Wages and salaries&acir

> Marshall Devices manufactures metal products and uses activity-based costing to allocate overhead costs to customer orders for pricing purposes. Many customer orders are won through competitive bidding based on costs. Direct material and direct manufactu

> Wharton has two classifications of professional staff: partners and associates. Peyton asks his assistant to examine the relative use of partners and associates on the recent Steger Enterprises and Bluestone Inc. jobs. The Steger Enterprises job used 1,0

> Peyton asks her assistant to collect details on those costs included in the $500,000 indirect-cost pool that can be traced to each individual job. After analysis, Wharton is able to reclassify $300,000 of the $500,000 as direct costs: Peyton decides to

> Wharton Associates is a recently formed law partnership. Denise Peyton, the managing partner of Wharton Associates, has just finished a tense phone call with Gus Steger, president of Steger Enterprises. Gus strongly complained about the price Wharton cha

> Derek Wilson operates Clean Ride Enterprises, an auto detailing company with 20 employees. Jamal Jackson has recently been hired by Wilson as a controller. Clean Ride’s previous accountant had done very little in the area of variance analysis, but Jackso

> MicroDisk is the market leader in the Secure Digital (SD) card industry and sells memory cards for use in portable devices such as mobile phones, tablets, and digital cameras. Its most popular card is the Mini SD, which it sells through outlets such as T

> Describe three features of a good balanced scorecard.

> Elena Martinez employs two workers in her wedding cake bakery. The first worker, Gabrielle, has been making wedding cakes for 20 years and is paid $25 per hour. The second worker, Joseph, is less experienced and is paid $15 per hour. One wedding cake req

> You are a new junior accountant at In Focus Corporation, maker of lenses for eyeglasses. Your company sells generic-quality lenses for a moderate price. Your boss, the controller, has given you the latest month’s report for the lens tra

> Collegiate Corn Hole is a small business that Zach Morris developed while in college. He began building wooden corn hole game sets for friends, hand painted with college colors and logos. As demand grew, he hired some workers and began to manage the oper

> On May 1, 2017, Bovar Company began the manufacture of a new paging machine known as Dandy. The company installed a standard costing system to account for manufacturing costs. The standard costs for a unit of Dandy follow: Direct materials (3 lb. at $4 p

> Sandy’s Snacks produces snack mixes for the gourmet and natural foods market. Its most popular product is Tempting Trail Mix, a mixture of peanuts, dried cranberries, and chocolate pieces. For each batch, the budgeted quantities and bud

> Oyster Bay Surfboards manufactures fiberglass surfboards. The standard cost of direct materials and direct manufacturing labor is $248 per board. This includes 35 pounds of direct materials, at the budgeted price of $3 per pound, and 11 hours of direct m

> Katharine Johnson is the owner of Best Bikes, a company that produces high-quality cross-country bicycles. Best Bikes participates in a supply chain that consists of suppliers, manufacturers, distributors, and elite bicycle shops. For several years Best

> You have been invited to interview for an internship with an international food manufacturing company. When you arrive for the interview, you are given the following information related to a fictitious Belgian chocolatier for the month of June. The choco

> Ellis Animal Health, Inc., produces a generic medication used to treat cats with feline diabetes. The liquid medication is sold in 100 ml vials. Ellis employs a team of sales representatives who are paid varying amounts of commission. Given the narrow ma

> Student Finance (StuFi) is a start-up that aims to use the power of social communities to transform the student loan market. It connects participants through a dedicated lending pool, enabling current students to borrow from a school’s

> “A component part should be purchased whenever the purchase price is less than its total manufacturing cost per unit.” Do you agree? Why?

> Nantucket Enterprises manufactures insulated cold beverage cups printed with college and corporate logos, which it distributes nationally in lots of 12 dozen cups. In June 2017, Nantucket produced 5,000 lots of its most popular line of cups, the 24-ounce

> Prepare journal entries and post them to T-accounts for all transactions in Exercise 7-30, including requirement 2. Summarize how these journal entries differ from the normal-costing entries described in Chapter 4, pages 120–123. From exercise 30: Daws

> Dawson, Inc., is a privately held furniture manufacturer. For August 2017, Dawson had the following standards for one of its products, a wicker chair: Standards per Chair Direct materials………………………….3 square yards of input at $5.50 per squar

> The Schuyler Corporation manufactures lamps. It has set up the following standards per finished unit for direct materials and direct manufacturing labor: Direct materials: 10 lb. at $4.50 per lb…………………………………..$45.00 Direct manufacturing labor: 0.5 hour

> Rugged Life, Inc., designs and manufactures fleece quarter-zip jackets. It sells its jackets to brand-name outdoor outfitters in lots of one dozen. Rugged Life’s May 2017 static budget and actual results for direct inputs are as follows

> Consider the following data collected for Great Homes, Inc.: Required: Compute the price, efficiency, and flexible-budget variances for direct materials and direct manufacturing labor. Direct Cost incurred: Actual inputs × actual prices Actual input

> Sunshine Foods manufactures pumpkin scones. For January 2017, it budgeted to purchase and use 14,750 pounds of pumpkin at $0.92 a pound. Actual purchases and usage for January 2017 were 16,000 pounds at $0.85 a pound. Sunshine budgeted for 59,000 pumpkin

> Cascade, Inc., produces the basic fillings used in many popular frozen desserts and treats—vanilla and chocolate ice creams, puddings, meringues, and fudge. Cascade uses standard costing and carries over no inventory from one month to t

> The Clarkson Company produces engine parts for car manufacturers. A new accountant intern at Clarkson has accidentally deleted the company’s variance analysis calculations for the year ended December 31, 2017. The following table is wha

> Bank Management Printers, Inc., produces luxury checkbooks with three checks and stubs perpage. Each checkbook is designed for an individual customer and is ordered through the customer’s bank. The company’s operating budget for September 2017 included t

> What are four key perspectives in the balanced scorecard?

> Bryant Company’s budgeted prices for direct materials, direct manufacturing labor, and direct marketing (distribution) labor per attaché case are $43, $6, and $13, respectively. The president is pleased with the following p

> Sweeney Enterprises manufactures tires for the Formula I motor racing circuit. For August 2017, it budgeted to manufacture and sell 3,600 tires at a variable cost of $71 per tire and total fixed costs of $55,000. The budgeted selling price was $114 per t

> HealthMart is a retail store selling home oxygen equipment. HealthMart also services home oxygen equipment, for which the company bills customers monthly. HealthMart has budgeted for increases in service revenue of $200 each month due to a recent adverti

> Consider each of the following independent situations for Sunrise Tours, a company owned by David Bartlett that sells motor coach tours to schools and other groups. Sunshine Tours owns a fleet of 10 motor coaches and employs 12 drivers, maintenance techn

> Consider each of the following independent situations for Prestige Fountains. Prestige manufactures and sells decorative fountains for commercial properties. The company also contracts to service both its own and other brands of fountains. Prestige has a

> Jiffy Mart has a Kaizen (continuous improvement) approach to budgeting monthly activity costs for each month of 2018. Each successive month, the budgeted cost-driver rate decreases by 0.4% relative to the preceding month. So, for example, February’s budg

> The Jerico store of Jiffy Mart, a chain of small neighborhood convenience stores, is preparing its activity-based budget for January 2018. Jiffy Mart has three product categories: soft drinks (35% of cost of goods sold [COGS]), fresh produce (25% of COGS

> DeWitt Company makes and sells artistic frames for pictures of weddings, graduations, and other special events. Ron Bahar, the controller, is responsible for preparing DeWitt’s master budget and has accumulated the following information

> Ever Clean Company provides gutter cleaning services to residential clients. The company has enjoyed considerable growth in recent years due to a successful marketing campaign and favorable reviews on service-rating Web sites. Ever Clean owner Joanne Cla

> Xander Manufacturing Company manufactures blue rugs, using wool and dye as direct materials. One rug is budgeted to use 36 skeins of wool at a cost of $2 per skein and 0.8 gallons of dye at a cost of $6 per gallon. All other materials are indirect. At th

> Describe two potential problems that should be avoided in relevant-cost analysis.

> Saphire, Inc., bottles and distributes mineral water from the company’s natural springs in northern Oregon. Saphire markets two products: 12-ounce disposable plastic bottles and 1-gallon reusable plastic containers. Required: 1. For 2018, Saphire market

> The Yucatan Co. in Mexico has a division that manufactures bicycles. Its budgeted sales for Model XG in 2018 are 95,000 units. Yucatan’s target ending inventory is 7,000 units, and its beginning inventory is 11,000 units. The company’s budgeted selling p

> What are the three methods for determining transfer prices?

> “Organizations typically adopt a consistent decentralization or centralization philosophy across all their business functions.” Do you agree? Explain.

> What is the relationship among motivation, goal congruence, and effort?

> Describe three criteria you would use to evaluate whether a management control system is effective.

> The McGrath Company has prepared a sales budget of 42,000 finished units for a 3-month period. The company has an inventory of 13,000 units of finished goods on hand at December 31 and has a target finished-goods inventory of 15,000 units at the end of t

> What is a management control system?

> “All transfer-pricing methods give the same division operating income.” Do you agree? Explain.

> What properties should transfer-pricing systems have?

> Give an example of how, under absorption costing, operating income could fall even though the unit sales level rises.

> The main trouble with variable costing is that it ignores the increasing importance of fixed costs in manufacturing companies. Do you agree? Why?

> Describe the difference between a direct materials efficiency variance and a variable manufacturing overhead efficiency variance.

> Assume variable manufacturing overhead is allocated using machine-hours. Give three possible reasons for a favorable variable overhead efficiency variance.

> Name four approaches to estimating a cost function.

4.99

See Answer