Question: Sequential processing is characterized by a. a

> Murray Inc. manufactures bicycle frames in two departments: Cutting and Welding. Murray uses the weighted average method. Manufacturing costs are added uniformly throughout the process. The following are cost and production data for the cutting departmen

> Inca Inc. produces soft drinks. Mixing is the first department and its output is measured in gallons. Inca uses the FIFO method. All manufacturing costs are added uniformly. For July, the mixing department provided the following information: Production:

> Harry Johnson, the chief financial officer of Ur Thrift Inc, a large retailer, had just finished a meeting with the Roger Swasey, the chief financial officer of the large retailer, and Connie Baker, its environmental officer. Over the years, Harry had ov

> Inca Inc. produces soft drinks. Mixing is the first department and its output is measured in gallons. Inca uses the FIFO method. All manufacturing costs are added uniformly. For July, the mixing department provided the following information: Production:

> Lorale Company, a producer of recreational vehicles, recently decided to begin producing a major subassembly for jet skis. The subassembly would be used by Lorale’s jet ski plants and also would be sold to other producers. The decision was made to lease

> Consider the following conversation between Leonard Bryner, president and manager of a firm engaged in job manufacturing, and Chuck Davis, certified management accountant, the firm’s controller. Leonard: Chuck, as you know, our firm has been losing marke

> Sharp Paper Inc. has three paper mills, one of which is located in Memphis, Tennessee. The Memphis mill produces 300 different types of coated and uncoated specialty printing papers. Management was convinced that the value of the large variety of product

> AKL Foundry manufactures metal components for different kinds of equipment used by the aerospace, commercial aircraft, medical equipment, and electronic industries. The company uses investment casting to produce the required components. Investment castin

> Golding Manufacturing, a division of Farnsworth Sporting Inc., produces two different models of bows and eight models of knives. The bow-manufacturing process involves the production of two major subassemblies: the limbs and the handles. The limbs pass t

> Consider the following conversation between Gary Means, manager of a division that produces industrial machinery, and his controller, Donna Simpson, a certified management accountant and certified public accountant: Gary: Donna, we have a real problem. O

> Tonya Martin, CMA and controller of the Parts Division of Gunderson Inc., was meeting with Doug Adams, manager of the division. The topic of discussion was the assignment of overhead costs to jobs and their impact on the division’s pricing decisions. The

> Reynolds Printing Company specializes in wedding announcements. Reynolds uses an actual job-order costing system. An actual overhead rate is calculated at the end of each month using actual direct labor hours and overhead for the month. Once the actual c

> Linda Ellis, division manager, is evaluated and rewarded on the basis of budgetary performance. Linda, her assistants, and the plant managers are all eligible to receive a bonus if actual divisional profits are between budgeted profits and 120% of budget

> Dr. Roger Jones is a successful dentist but is experiencing recurring financial difficulties. For example, Jones owns his office building, which he leased to the professional corporation that housed his dental practice (he owns all shares in the corporat

> Fuerza Inc. produces a protein drink. The product is sold by the gallon. The company has two departments: Mixing and Bottling. For August, the bottling department had 60,000 gallons in beginning inventory (with transferred-in costs of $213,000) and compl

> Pat James, the purchasing agent for a local plant of the Oakden Electronics Division, was considering the possible purchase of a component from a new supplier. The component’s purchase price, $0.90, compared favorably with the standard price of $1.10. Gi

> Paul Golding and his wife, Nancy, established Crunchy Chips in 1938. Over the past 60 years, the company has established distribution channels in 11 western states, with production facilities in Utah, New Mexico, and Colorado. In 1980, Paul’s son, Edward

> Mac Ericson and Tammy Ferguson met at an IMA conference two months ago and began dating. Mac is the controller for Longley Enterprises, and Tammy is a marketing manager for Sharp Products. Longley is a major supplier for Piura Products, a competitor of S

> An example of a societal cost is a. medical care due to polluted air. b. recycling scrap. c. disposing of toxic materials. d. maintaining pollution equipment. e. All of these.

> An example of an environmental internal failure cost is a. cleaning up oil spills. b. damaging ecosystems from solid waste disposal. c. cost of operating scrubbers. d. measuring levels of contamination. e. None of these.

> Which of the following represents environmental detection costs? a. Depreciation on scrubbers b. Recycling products c. Disposing of toxic materials d. Carrying out contamination tests e. None of these.

> Which of the following is an external failure cost (quality)? a. Design reviews b. Retesting c. Rework d. Lost sales e. All of these.

> Which of the following is an internal failure cost (quality)? a. Supplier evaluation and selection b. Packaging inspection c. Retesting d. Product liability e. Complaint adjustment

> Which of the following is an appraisal cost (quality)? a. Manager of an inspection team b. Quality reporting c. Design reviews d. Warranties e. Retesting

> Which of the following is a quality prevention cost? a. Quality planning b. Supplier evaluation and selection c. Quality audits d. Field trials e. All of these.

> Quillen Company manufactures a product in a factory that has two producing departments, Cutting and Sewing, and two support departments, S1 and S2. The activity driver for S1 is number of employees, and the activity driver for S2 is number of maintenance

> Striving to produce the same activity output with lower costs for the input used is concerned with which of the following dimensions of activity performance? a. Quality b. Time c. Activity sharing d. Effectiveness e. Efficiency

> Which of the following is a nonunit-level driver? a. Direct labor hours b. Machine hours c. Direct materials d. Setup hours e. Assembly hours

> Thom Company produces 60 units in 10 hours. The velocity for Thom a. is 6 units per hour. b. is 10 hours per unit. c. is 10 minutes per unit. d. 6 minutes per unit. e. cannot be calculated.

> The job-order cost sheet is a subsidiary account to a. Raw Materials. b. Work in Process. c. Finished Goods. d. Cost of Goods Sold. e. Jobs Started.

> Thom Company produces 60 units in 10 hours. The cycle time for Thom a. is 6 units per hour. b. is 10 hours per unit. c. is 10 minutes per unit. d. is 6 minutes per unit. e. cannot be calculated.

> The cost of inspecting incoming parts is most likely to be reduced by a. activity sharing. b. activity elimination. c. activity reduction. d. activity selection. e. None of these.

> Suppose that a company is spending $60,000 per year for inspecting, $30,000 for purchasing, and $40,000 for reworking products. A good estimate of nonvalue-added costs would be a. $70,000. b. $130,000. c. $40,000. d. $90,000. e. $100,000.

> Which of the following are nonvalue-added activities? a. Moving goods b. Storing goods c. Inspecting finished goods d. Reworking a defective product e. All of these.

> A forklift and its driver used for moving materials are examples of a. activity inputs. b. activity output measures. c. resource drivers. d. activity outputs. e. root causes.

> Lambert Company has two suppliers: Deming and Leming. The cost of warranty work due to defective components is $2,000,000. The total units repaired under warranty average 100,000, of which 90,000 have components from Deming and 10,000 have components fro

> At the beginning of June, Rhone Company had two jobs in process, Job 44 and Job 45, with the following accumulated cost information: During June, two more jobs (46 and 47) were started. The following direct materials and direct labor costs were added t

> This year, Lambert Company will ship 1,500,000 pounds of goods to customers at a cost of $1,200,000. If a customer orders 10,000 pounds and produces $200,000 of revenue (total revenue is $20 million), the amount of shipping cost assigned to the customer

> Which of the following is a true statement about activity-based supplier costing? a. The cost of a supplier is the purchase price of the components or materials acquired. b. It encourages managers to increase the number of suppliers. c. It encourages ma

> Which of the following is a true statement about activity-based customer costing? a. Customer diversity requires multiple drivers to trace costs accurately to customers. b. Customers consume customer-driven activities in the same proportions. c. It seld

> A batch-level driver is consumed by a product each and every time that a. a batch of products is produced. b. a unit is produced. c. a purchase order is issued. d. a customer complains. e. None of these.

> The predetermined overhead rate equals a. actual overhead divided by actual activity level for a period. b. estimated overhead divided by estimated activity level for a period. c. actual overhead minus estimated overhead. d. actual overhead multiplied b

> The mixing department incurred $46,000 of manufacturing costs during the month of September. The department transferred out 2,300 units and had 500 units in EWIP, 40% complete. There was no BWIP. The cost of EWIP is a. $9,200. b. $10,000. c. $3,680. d.

> The mixing department incurred $46,000 of manufacturing costs during the month of September. The department transferred out 2,300 units and had 500 units in EWIP, 40% complete. There was no BWIP. The cost of goods transferred out is a. $42,320. b. $46,

> The mixing department incurred $46,000 of manufacturing costs during the month of September. The department transferred out 2,300 units and had 500 units in EWIP, 40% complete. There was no BWIP. The unit cost for the month of September is a. $20. b. $

> During the month of May, the grinding department produced and transferred out 2,300 units. EWIP had 500 units, 40% complete. There was no BWIP. The equivalent units of output for May are a. 2,000. b. 2,500. c. 2,300. d. 2,800. e. none of these.

> The costs transferred from a prior process to a subsequent process are a. treated as another type of materials cost for the receiving department. b. referred to as transferred-in costs (for the receiving department). c. referred to as the cost of goods

> Patrick Inc. makes industrial solvents. Budgeted direct labor hours for the first three months of the coming year are: January ……………………………………….. 13,140 February ……………………………………… 12,300 March ………………………………………….. 15,075 The variable overhead rate is $0.70

> To record the transfer of costs from a prior process to a subsequent process, the following entry would be made: a. debit Finished Goods and credit Work in Process. b. debit Work in Process (subsequent department) and credit Transferred-In Materials. c.

> Transferred-in goods are treated by the receiving department as a. units started for the period. b. a material added at the beginning of the process. c. a category of materials separate from conversion costs. d. all of these. e. none of these.

> Job-order costing works well whenever a. homogeneous products pass through a series of processes and receive similar doses of conversion inputs and different doses of material inputs. b. homogeneous products pass through a series of processes and receiv

> With no uniform inputs, the cost of EWIP is calculated by a. adding the materials cost to the conversion cost. b. subtracting the cost of goods transferred out from the total cost of materials. c. multiplying the unit cost in each input category by the

> In a normal costing system, the cost of a job includes a. actual direct materials, actual direct labor, and estimated (applied) overhead. b. estimated direct materials, estimated direct labor, and estimated overhead. c. actual direct materials, actual d

> When materials are added either at the beginning or the end of the process, a unit cost should be calculated for the a. materials and conversion categories. b. materials category only. c. materials and labor categories. d. conversion category only. e. l

> For August, Lanny Company had 25,000 units in BWIP, 40% complete, with costs equal to $36,000. During August, the cost incurred was $450,000. Using the FIFO method, Lanny had 125,000 equivalent units for August. There were 100,000 units transferred out d

> Assume for August that Faust Manufacturing has manufacturing costs in BWIP equal to $80,000. During August, the cost incurred was $720,000. Using the FIFO method, Faust had 120,000 equivalent units for August. The cost per equivalent unit for August is

> During July, Faust Manufacturing started and completed 80,000 units. In BWIP, there were 25,000 units, 20% complete. In EWIP, there were 25,000 units, 80% complete. Using FIFO, the equivalent units are a. 80,000 units. b. 120,000 units. c. 65,000 units.

> At the beginning of the year, Hallett Company estimated the following: Hallett uses departmental overhead rates. In the cutting department, overhead is applied on the basis of machine hours. In the sewing department, overhead is applied on the basis of

> For August, Kimbrell Manufacturing has costs in BWIP equal to $112,500. During August, the cost incurred was $450,000. Using the weighted average method, Kimbrell had 125,000 equivalent units for August. There were 100,000 units transferred out during th

> During June, Kimbrell Manufacturing completed and transferred out 100,000 units. In EWIP, there were 25,000 units, 80% complete. Using the weighted average method, the equivalent units are a. 100,000 units. b. 125,000 units. c. 105,000 units. d. 110,000

> During May, Kimbrell Manufacturing completed and transferred out 100,000 units. In EWIP, there were 25,000 units, 40% complete. Using the weighted average method, the equivalent units are a. 100,000 units. b. 125,000 units. c. 105,000 units. d. 110,000

> Process costing works well whenever a. heterogeneous products pass through a series of processes and receive different doses of materials, labor, and overhead. b. material cost is accumulated by process and conversion cost is accumulated by process. c.

> The method that assigns support department costs by giving full recognition to support department interactions is known as a. the sequential method. b. the proportional method. c. the reciprocal method. d. the direct method. e. None of these.

> The method that assigns support department costs by giving partial recognition to support department interactions is known as a. the sequential method. b. the proportional method. c. the reciprocal method. d. the direct method. e. None of these.

> The ending balance of which of the following accounts is calculated by summing the totals of the open (unfinished) job-order cost sheets? a. Raw Materials b. Overhead Control c. Work in Process d. Finished Goods e. Cost of Goods Sold

> The method that assigns support department costs only to producing departments in proportion to each department’s usage of the service is known as a. the sequential method. b. the proportional method. c. the reciprocal method. d. the direct method. e. N

> An example of a support department is a. data processing. b. personnel. c. a materials storeroom. d. payroll. e. All of these.

> An example of a producing department is a. a materials storeroom. b. the maintenance department. c. engineering design. d. assembly. e. All of these.

> Patrick Inc. makes industrial solvents sold in five-gallon drums. Planned production in units for the first three months of the coming year is: January ……………………………. 43,800 February …………………………… 41,000 March ………………………………. 50,250 Each drum requires 5.5 ga

> Those departments that provide essential services to producing departments are referred to as a. revenue generating departments. b. support departments. c. profit centers. d. production departments. e. None of these.

> Those departments responsible for creating products or services that are sold to customers are referred to as a. profit making departments. b. producing departments. c. cost centers. d. support departments. e. None of these.

> During June, Faust Manufacturing started and completed 80,000 units. In BWIP, there were 25,000 units, 80% complete. In EWIP, there were 25,000 units, 60% complete. Using FIFO, the equivalent units are a. 80,000 units. b. 95,000 units. c. 85,000 units.

> For September, Murphy Company has manufacturing costs in BWIP equal to $100,000. During September, the manufacturing costs incurred were $550,000. Using the weighted average method, Murphy had 100,000 equivalent units for September. The equivalent unit c

> The costs of a job are accounted for on the a. materials requisition sheet. b. time ticket. c. requisition for overhead application. d. sales invoice. e. job-order cost sheet.

> When a job is completed, the total cost of the job is a. subtracted from the raw materials account. b. added to the work-in-process account. c. added to the finished goods account. d. added to the accounts payable account. e. subtracted from the cost of

> When materials are requisitioned for use in production in a job-order costing firm, the cost of materials is added to the a. raw materials account. b. work-in-process account. c. finished goods account. d. accounts payable account. e. cost of goods sold

> Which of the following statements is true? a. Job-order costing is used only in manufacturing firms. b. Process costing is used only for services. c. Job-order costing is simpler to use than process costing because the recordkeeping requirements are les

> The total variable overhead variance can be expressed as the sum of a. the under applied variable overhead and the spending variance. b. the efficiency variance and the over applied variable overhead. c. the spending, efficiency, and volume variances. d

> Because the calculation of both variances is based on direct labor hours, a favorable labor efficiency variance implies that a. the variable overhead efficiency variance will be favorable. b. the variable overhead efficiency variance will also be unfavo

> La Cucina Company sells kitchen supplies and housewares. Lava stone is used in production of molcajetes (mortars and pestles used in the making of guacamole) and is purchased from external suppliers. Each year, 8,000 pounds of lava stone is used; it is u

> A variable overhead spending variance can occur because a. prices for individual overhead items have increased. b. prices for individual overhead items have decreased. c. more of an individual overhead item was used than expected. d. less of an individu

> The total variable overhead variance is the difference between a. the budgeted variable overhead and the actual variable overhead. b. the actual variable overhead and the applied variable overhead. c. the budgeted variable overhead and the applied varia

> A firm comparing the actual variable costs of producing 10,000 units with the total variable costs of a static budget based on 9,000 units would probably see a. no variances. b. small favorable variances. c. large unfavorable variances. d. large favorab

> To help assess performance, managers should use a. a static budget. b. a master budget. c. a continuous budget. d. a before-the-fact flexible budget. e. none of these.

> To help deal with uncertainty, managers should use a. an after-the-fact flexible budget. b. a master budget. c. a static budget. d. a before-the-fact flexible budget. e. none of these.

> To create a meaningful performance report, actual costs and expected costs should be compared a. at the actual level of activity. b. weekly. c. at the budgeted level of activity. d. at the average level of activity. e. hourly.

> In activity-based budgeting, flexible budget formulas are created using a. only unit-level drivers. b. only nonunit-level drivers. c. both unit-level and nonunit-level drivers. d. only direct labor hours. e. all of these.

> Activity flexible budgeting makes it possible to a. predict what activity costs will be as activity output changes. b. improve traditional budgetary performance reporting. c. enhance the ability to manage activities. d. do all these. e. do only a and c.

> In activity-based budgeting, costs are classified as variable or fixed with respect to a. only the units budgeted. b. only the units produced. c. only the units sold. d. only the direct labor hours. e. none of these.

> Responsibility for the volume variance usually is assigned to a. the accounting department. b. the receiving department. c. the shipping department. d. the manufacturing department. e. none of these.

> Pleni Company produces 18-ounce boxes of a wheat cereal in three departments: Mixing, Cooking, and Packaging. During August, Pleni produced 125,000 boxes with the following costs: Required: 1. Calculate the costs transferred out of each department. 2.

> An unfavorable volume variance can occur because a. too much finished goods inventory was held. b. the company overproduced. c. the actual output was less than expected or practical capacity. d. the actual output was greater than expected or practical c

> Because of the nature of fixed overhead items, the difference between the actual fixed overhead cost and the budgeted fixed overhead is a. likely to be small. b. likely to be large. c. usually a major concern. d. often attributable to labor inefficiency

> The total fixed overhead variance can be expressed as the sum of a. the spending and efficiency variances. b. the efficiency and volume variances. c. the spending and volume variances. d. the flexible budget and the volume variances. e. none of these.

> The total fixed overhead variance is a. the difference between actual and applied fixed overhead costs. b. the difference between budgeted and applied fixed overhead costs. c. the difference between budgeted fixed and variable overhead costs. d. the dif

> In a performance report that details the spending and efficiency variances, which of the following columns will be found? a. A cost formula for each item b. A budget for actual hours for each item c. A budget of standard hours for each item d. All of th

> For performance reporting, it is best to compare actual costs with budgeted costs using a. short-term budgets. b. static budgets. c. flexible budgets. d. master budgets. e. none of these.

> The standard quantity of materials allowed is computed as a. Unit Quantity Standard × Standard Output. b. Unit Quantity Standard × Normal Output. c. Unit Quantity Standard × Practical Output. d. Unit Quantity Standard × Actual Output. e. None of these.

> The underlying details for the standard cost per unit are provided in a. the standard work-in-process account. b. the standard production budget. c. the standard cost sheet. d. the balance sheet. e. none of these.

> Standard costs are developed for a. direct materials. b. direct labor. c. variable overhead. d. fixed overhead. e. all of these.