4.99 See Answer

Question: The frame-welding department of a large

The frame-welding department of a large automotive company welds car frames as they pass down the assembly line. Four computer-controlled robots make the welds on each frame simultaneously. When installed last year, each robot was expected to have a five-year useful life before becoming obsolete and being replaced by newer, faster models with more advanced electronics. Over its life, each robot is expected to make 100 million welds. The robots cost $8 million apiece and have no salvage value at the end of their useful lives after the cost of dismantling and removing them is taken into consideration. The firm has a traditional absorption costing system that costs each frame. The accounting system supports decision making and control. Straight-line depreciation is used for both internal and external reporting, and accelerated depreciation is used for taxes. As frames move through the welding stations, they are charged based on the number of welds made on each frame. Different car frames require different numbers of welds, with some frame models requiring up to 1,000 welds. Welds cost $0.11 each. This charge is set at the beginning of the year by estimating the fixed and variable costs in the welding department. Accounting determines the expected number of welds projected for the year by taking the projected number of frames times the number of welds per frame. The expected number of welds is used to estimate total costs in the welding department. The cost per weld is then the ratio of the projected welding costs to the expected number of welds. Seventy-two million welds were projected for the current year. The following statement illustrates the computation of the charge per weld:
The frame-welding department of a large automotive company welds car frames as they pass down the assembly line. Four computer-controlled robots make the welds on each frame simultaneously. When installed last year, each robot was expected to have a five-year useful life before becoming obsolete and being replaced by newer, faster models with more advanced electronics. Over its life, each robot is expected to make 100 million welds. The robots cost $8 million apiece and have no salvage value at the end of their useful lives after the cost of dismantling and removing them is taken into consideration. The firm has a traditional absorption costing system that costs each frame. The accounting system supports decision making and control. Straight-line depreciation is used for both internal and external reporting, and accelerated depreciation is used for taxes. As frames move through the welding stations, they are charged based on the number of welds made on each frame. Different car frames require different numbers of welds, with some frame models requiring up to 1,000 welds. Welds cost $0.11 each. This charge is set at the beginning of the year by estimating the fixed and variable costs in the welding department. Accounting determines the expected number of welds projected for the year by taking the projected number of frames times the number of welds per frame. The expected number of welds is used to estimate total costs in the welding department. The cost per weld is then the ratio of the projected welding costs to the expected number of welds. Seventy-two million welds were projected for the current year.
The following statement illustrates the computation of the charge per weld:
After reviewing the above statement, Amy Miller, manager of the body fabricating division
(which includes the welding department), made the following remarks:
I know we use straight-line depreciation to calculate the depreciation component of the cost per weld now. But it would seem to make a lot of sense to compute robot depreciation using unitsof-production depreciation. Each robot cost $8 million and was expected to perform 100 million welds over its useful life. That comes to 8¢ per weld. Thus, we should charge each weld at 8¢ plus the remaining fixed and variable costs as calculated on this statement. If I back out the $6.4 million depreciation from the above figures and recompute the fixed costs per weld at 72 million welds, I get $255,000 divided by 72 million, or $0.00354. Add this to the variable cost per weld of $0.0176 plus the 8¢ depreciation and our cost per weld is $0.1011 per weld, not the 11¢ now. This reduces our costs on our complicated frames by as much as $10.
The real advantage of using units-of-production depreciation, in my opinion, is that depreciation becomes a variable cost. This has real advantages because, when you lower your fixed costs, your break-even point is lower. Operating leverage is lower, and thus the company’s overall risk is reduced. 
I think we should go to the plant controller and see if we can convince him to use a more
realistic basis for calculating the depreciation costs of the robots.
Required:
Do you agree with Amy Miller’s proposal?
After reviewing the above statement, Amy Miller, manager of the body fabricating division (which includes the welding department), made the following remarks: I know we use straight-line depreciation to calculate the depreciation component of the cost per weld now. But it would seem to make a lot of sense to compute robot depreciation using unitsof-production depreciation. Each robot cost $8 million and was expected to perform 100 million welds over its useful life. That comes to 8¢ per weld. Thus, we should charge each weld at 8¢ plus the remaining fixed and variable costs as calculated on this statement. If I back out the $6.4 million depreciation from the above figures and recompute the fixed costs per weld at 72 million welds, I get $255,000 divided by 72 million, or $0.00354. Add this to the variable cost per weld of $0.0176 plus the 8¢ depreciation and our cost per weld is $0.1011 per weld, not the 11¢ now. This reduces our costs on our complicated frames by as much as $10. The real advantage of using units-of-production depreciation, in my opinion, is that depreciation becomes a variable cost. This has real advantages because, when you lower your fixed costs, your break-even point is lower. Operating leverage is lower, and thus the company’s overall risk is reduced. I think we should go to the plant controller and see if we can convince him to use a more realistic basis for calculating the depreciation costs of the robots. Required: Do you agree with Amy Miller’s proposal?





Transcribed Image Text:

Charge per Weld, Current Year Variable Costs Fixed Total (at 72 Million Welds) Costs Costs $ 6,400,000 $ 6,400,000 Depreciation* Welding rods Engineering services Electricity Factory overhead $ 700,000 700,000 300,000 200,000 500,000 180,000 180,000 85,000 55,000 140,000 $ 1,265,000 72,000,000 $ 6,655,000 $ 7,920,000 72,000,000 Total + Expected number of welds 72,000,000 Cost per weld $ 0.0176 $ 0.0924 $ 0.1100 *Depreciation per year = 4 robots x $8 million per robot + 5-year life.



> Suppose that Congress passes legislation making it more difficult for firms to fire workers. (An example is a law requiring severance pay for fired workers.) If this legislation reduces the rate of job separation without affecting the rate of job finding

> If a small open economy bans the import of Japanese video game systems, what happens to saving, investment, the trade balance, the interest rate, and the exchange rate?

> What will happen to the trade balance and the real exchange rate of a small open economy when government purchases increase, such as during a war? Does your answer depend on whether this is a local war or a world war?

> Answer the following questions about your own experience in the labor force. a. When you or one of your friends is looking for a part-time job, how many weeks does it typically take? After you find a job, how many weeks does it typically last? b. From yo

> If inflation rises from 6 to 8 percent, what happens to real and nominal interest rates according to the Fisher effect?

> Suppose that the money demand function takes the form (M/P)d 5 L(i, Y ) 5 Y/(5i) a. If output grows at rate g and the nominal interest rate is constant, at what rate will the demand for real balances grow? b. What is the velocity of money in this economy

> Explain how banks create money.

> In the nation of Wiknam, people hold $1,000 of currency and $4,000 of demand deposits in the only bank, Wikbank. The reserve–deposit ratio is 0.25. a. What are the money supply, the monetary base, and the money multiplier? b. Assume that Wikbank is a sim

> Write a Cobb–Douglas production function for which capital earns one-fourth of total income.

> Suppose that an economy’s production function is Cobb–Douglas with parameter a = 0.3. a. What fractions of income do capital and labor receive? b. Suppose that immigration increases the labor force by 10 percent. What happens to total output (in percent)

> How are the CPI and the PCE deflator similar, and how are they different?

> Place each of the following transactions in one of the four components of expenditure: consumption, investment, government purchases, and net exports. a. Boeing sells an airplane to the U.S. Air Force. b. Boeing sells an airplane to American Airlines. c.

> Use the model of supply and demand to explain how a fall in the price of frozen yogurt would affect the price of ice cream and the quantity of ice cream sold. In your explanation, identify the exogenous and endogenous variables.

> What are adverse selection and moral hazard? How do banks mitigate these problems?

> What are the net capital outflow and the trade balance? Explain how they are related.

> Some commentators argue that when a financial firm is rescued by the government in the midst of a financial crisis, the firm’s equity holders should be wiped out, but the firm’s creditors should be protected. Does this solve the moral hazard problem? Why

> Describe four problems affecting measurement of the government budget deficit.

> The Social Security system levies a tax on workers and pays benefits to the elderly. Suppose that Congress increases both the tax and the benefits. For simplicity, assume that Congress announces that the increases will last for only one year. a. How do y

> Describe the Lucas critique.

> A central bank has decided to adopt inflation targeting and is now debating whether to target 5 percent inflation or zero inflation. The economy is described by the following Phillips curve: u =5 - 0.5 (π - Eπ), where u and π are the unemployment rate an

> Explain why an increase in the interest rate reduces the amount of residential investment.

> The IS–LM model developed in Chapters 11 and 12 assumes that investment depends only on the interest rate. Yet our theories of investment suggest that investment might also depend on national income: higher income might induce firms to invest more. a. Ex

> How do the life-cycle and permanent-income hypotheses resolve the seemingly contradictory pieces of evidence regarding consumption behavior?

> The chapter analyzes Fisher’s model for the case in which the consumer can save or borrow at an interest rate of r and for the case in which the\ consumer can save at this rate but cannot borrow at all. Consider now the intermediate case in which the con

> A central bank has a new head, who decides to raise the target inflation rate from 2 to 3 percent. Using a graph of the dynamic AD–AS model, show the effect of this change. What happens to the nominal interest rate immediately upon the change in policy a

> Use the model of the small open economy to predict what would happen to the trade balance, the real exchange rate, and the nominal exchange rate in response to each of the following events. a. A fall in consumer confidence about the future induces consum

> “If a central bank wants to achieve lower nominal interest rates, it has to raise the nominal interest rate.”

> Why might inflation be inertial?

> An economy has the following equation for the Phillips curve: π = Eπ - .5(u - 6) People form expectations of inflation by taking a weighted average of the previous two years of inflation: Eπ= 0.7 π-1 + 0.3 π-2 Okun’s law for this economy is: (Y 2 Y21)/Y2

> In the Mundell–Fleming model with floating exchange rates, explain what happens to aggregate income, the exchange rate, and the trade balance when a quota on imported cars is removed. What would happen if exchange rates were fixed rather than floating?

> A small open economy with a floating exchange rate is in recession with balanced trade. If policymakers want to reach full employment while maintaining balanced trade, what combination of monetary and fiscal policy should they choose? Use a graph, and be

> Suppose that policymakers in a large open economy want to raise the level of investment without changing aggregate income or the exchange rate. a. Is there any combination of domestic monetary and fiscal policies that would achieve this goal? b. Is there

> What is the impact of a decrease in the money supply on the interest rate, income, consumption, and investment?

> Consider the economy of Hicksonia. a. The consumption function is given by C = 300 + 0.6(Y - T).The investment function is I = 700 - 80r. Government purchases and taxes are both 500. For this economy, graph the IS curve for r ranging from 0 to 8. b. The

> Why does the IS curve slope downward?

> Although our development of the Keynesian cross in this chapter assumes that taxes are a fixed amount, most countries levy some taxes that rise automatically with national income. (Examples in the United States include the income tax and the payroll tax.

> If a war broke out abroad, it would affect the U.S. economy in many ways. Use the model of the large open economy to examine each of the following effects of such a war. What happens in the United States to saving, investment, the trade balance, the inte

> Why does the aggregate demand curve sloped downward?

> Let’s examine how the goals of the Fed influence its response to shocks. Suppose that in scenario A the Fed cares only about keeping the price level stable and in scenario B the Fed cares only about keeping output and employment at their natural levels.

> What data would you need to determine whether an economy has more or less capital than in the Golden Rule steady state?

> In the United States, the capital share of GDP is about 30 percent, the average growth in output is about 3 percent per year, the depreciation rate is about 4 percent per year, and the capital–output ratio is about 2.5. Suppose that the production functi

> Suppose an economy described by the Solow model is in a steady state with population growth n of 1.8 percent per year and technological progress g of 1.8 percent per year. Total output and total capital grow at 3.6 percent per year. Suppose further that

> Might a policymaker choose a steady state with more capital than in the Golden Rule steady state? With less capital than in the Golden Rule steady state? Explain your answers.

> Consider an economy described by the production function: Y = F(K, L) = K 0.4L0.6. a. What is the per-worker production function? b. Assuming no population growth or technological progress, find the steady-state capital stock per worker, output per worke

> Give three explanations of why the real wage may remain above the level that equilibrates labor supply and labor demand.

> In this chapter we saw that the steady-state rate of unemployment is U/L= s/(s + f ). Suppose that the unemployment rate does not begin at this level. Show that unemployment will evolve over time and reach this steady state. (Hint: Express the change in

> If a small open economy cuts defense spending, what happens to saving, investment, the trade balance, the interest rate, and the exchange rate?

> Write the quantity equation and explain it.

> Explain the difference between macroeconomics and microeconomics. How are these two fields related?

> Auden Manufacturing produces a single product with the following standards: Standard direct labor cost per unit…………………………………….. $2.00 Standard direct materials per unit ……………………………………… $3.00 Flexible overhead budget ………………………………………………… $60,000 Normal p

> An investment opportunity that will involve an investment of $1,000 will generate $300 per year for five years and then earn $140 per year forever. What is the net present value of this investment, assuming the interest rate is 14 percent?

> The purchasing department of Bradley Inc. is responsible for companywide purchasing. Its total costs are assigned to each division based on the number of purchase orders the purchasing department processes for each division. The purchasing department’s f

> Ultrasonic manufactures three ultrasound imaging systems: Avex, AvexII, and Mel. Overhead is allocated to each system based on standard direct material dollars in each system. The firm uses a flexible overhead budget to calculate the overhead rate for th

> Your firm uses return on assets (ROA) to evaluate investment centers and is considering changing the valuation basis of assets from historical cost to current value. When the historical cost of the asset is updated, a price index is used to approximate r

> Digital Convert (DC) is a three-year-old start-up company with most of its capital coming from banks and personal investments by the founders. DC manufactures a high-resolution scanner (MXP35) for professional photographers that scans 35-mm negative film

> An October 25, 1999, article in BusinessWeek by D. Brady, “Why Xerox Is Struggling,” reported: President and Chief Executive G. Richard Thoman is a big-picture guy. For the past two years, he has preached a digital revolution at the copier giant. Get dow

> Joon manufactures and sells to retailers a variety of home care and personal care products. Joon has a single plant that produces all four of its product lines: Stick Goods (brooms and mops), Floor Care(strippers, soaps, and waxes), Brushes (hair brushes

> The owner of a small software company felt his accounting system was useless. He stated, “Accounting systems only generate historical costs. Historical costs are useless in my business because everything changes so rapidly.” Required: a. Are historical c

> IPX is a specialized packaging company that packages other manufacturers’ products. Other manufacturers ship their products to IPX in bulk. IPX then packages the products using high-speed, stateof-the-art packaging machines and ships the packaged product

> Discretionary costs are defined as “costs that (1) arise from periodic (usually yearly) appropriation decisions regarding the maximum amounts to be incurred and (2) have no well-specified function relating inputs (as measured by the costs) and outputs (a

> Old Town Roasters (OTR) owns and operates a chain of 12 coffee shops around town. OTR’s strategy is to provide the highest-quality coffee and baked goods in a warm, friendly environment. Each OTR provides its customers Internet access and current newspap

> You are a new consultant with the Boston Group and have been sent to advise the executives of Penury Company. The company recently acquired product line L from an out-of-state concern and now plans to produce it, along with its old standby K, under one r

> Zeflax manufactures insulated plastic bottles for bikes that the company sells for $4.00 per bottle. Last year the company produced 230,000 bottles and sold 200,000 bottles. This year Zeflax produced 200,000 bottles and sold 230,000 bottles. In both year

> Outback Opals mines and processes opals from its Australian opal mines. The process consists of removing large chunks of stones, carefully splitting the stones and removing the opals, and then cutting and polishing the stones. Finally, the opals are sort

> Slawson is a publicly traded Argentine company with three operating companies located in Argentina, the United States, and Germany. Slawson’s corporate headquarters in Buenos Aires oversees the three operating companies. The annual cost

> Rogers Petersen and Cabots are two of the five largest investment banks in the United States. Last year there was a major scandal at Cabots involving manipulation of some auctions for government bonds. A number of senior partners at Cabots were charged w

> Critically discuss the following quotation: ABC (activity-based cost) information, by itself, does not invoke actions and decisions leading to improved profits and operating performance. . . . For ABC systems to be effective, everyone in the company—from

> Phipps manufactures circuit boards in Division Low in a country with a 30 percent income tax rate and transfers them to Division High in a country with a 40 percent income tax. An import duty of 15 percent of the transfer price is paid on all imported pr

> Black Feather Indian Nation is a 900 square-mile territory in North Dakota that has the legal right to sell gasoline without having to collect or pay state and federal taxes on it. Gasoline in North Dakota sells for $1.20 per gallon, which includes $0.50

> Guest Watches is a division of Guest Fashions, a large, international fashion designer. Guest Watches manufactures highly stylish watches for young adults (age 18 to 30) who are fashion conscious. It is a profit center and its senior managementâ&#1

> Dr. Lucy Zang, a noted local podiatrist, plans to open a retail shoe store specializing in hard-to-find footwear for people with feet problems such as bunions, flat feet, mallet toes, diabetic feet, and so forth. Because of the wide variety of foot ailme

> International Computer Company (ICC) has annual revenues of $2 billion primarily from selling and leasing large networked workstation systems to businesses and universities. The manufacturing division produces the hardware that is sold or leased by the m

> The National Direct Student Loan (NDSL) program allows college students to borrow funds from the federal government. The contract stipulates that the annual percentage rate of interest is 0 percent until 12 months after the student ceases his or her form

> Magee Inc. pays its sales manager a bonus of $10,000 if the manager meets the sales quota. The sales manager can exert either high effort or low effort. The additional disutility of the manager in exerting high effort relative to low effort to meet the s

> Panarude Airfreight is an international air freight hauler with more than 45 jet aircraft operating in the United States and the Pacific Rim. The firm is headquartered in Melbourne, Australia, and is organized into five geographic areas: Australia, Japan

> The Xerox DocuColor iGen3 digital production press is a high volume, on-demand, full-color printer capable of producing up to 6,000 impressions (pages) per hour. It weighs nearly 3 tons, stretches 30 feet long, and holds more than 40 pounds of dry ink. I

> Shady Tree produces two products: M1 and M2. There are no beginning inventories or ending working-process inventories of either M1 or M2. A single plant wide overhead rate is used to allocate overhead to products using standard direct labor hours. This o

> Anpax, Inc., manufactures two products: L7 and Q2. Overhead is allocated to products based on machine hours. Management uses a flexible budget to forecast overhead. For the current year, fixed factory overhead is projected to be $2.75 million and variabl

> Darien Industries operates a cafeteria for its employees. The operation of the cafeteria requires fixe costs of $4,700 per month and variable costs of 40 percent of sales. Cafeteria sales are currently averaging $12,000 per month. Darien has an opportuni

> A finance professor and a marketing professor were recently comparing notes on their perceptions of corporations. The finance professor claimed that the goal of a corporation should be to maximize the value to the shareholders. The marketing professor cl

> Oaks Auto Supply just acquired a patent on an antifreeze recycler that flushes used antifreeze from a car, filters it, removes dissolved chemicals, and then returns it to the automobile without having to dispose of the old antifreeze or use new antifreez

> You have just purchased a house and have obtained a 30-year, $200,000 mortgage with an interest rate of 10 percent. Required: a. What is your annual payment? b. Assuming you bought the house on January 1, what is the principal balance after one year? Aft

> Montana Pen Company manufactures a full line of premium writing instruments. It has 12 different styles and within each style, it offers ball point pens, fountain pens, mechanical pencils, and a roller ball pen. Most models also come in three finishes—go

> The current year’s income statement for Sants Brakes Co. on a variable costing basis appears in the accompanying table. Inventories of finished stock were increased during the year in anticipation of increases in sales volume in the cur

> After the Iraqi invasion of Kuwait in August 1990, the world price of crude oil doubled to more than $30 per barrel in anticipation of reduced supply. Immediately, the oil companies raised the retail price on refined oil products even though these produc

> Swan Systems developed and manufactures residential water filtration units that are installed under sinks. The filtration unit removes chlorine and other chemicals from drinking water. This Dutch company has successfully expanded sales of its units in th

> Starling Coatings produces weatherproofing coatings that protect metal from oxidation. One of Starling’s patented coatings, zurtan, is composed of two inputs, magna45 and zelon. While both inputs are required, they can be substituted fo

> Sunstar sells a full line of small home kitchen appliances, including toasters, coffee makers, blenders, and bread machines. It is organized into a marketing division and a manufacturing division. The manufacturing division is composed of several plants,

> Watson’s Bay Co. is considering a contract to manufacture didgeridoos. Producing didgeridoos will require an investment in equipment of $100,000 and operating costs of $15 per didgeridoo produced. The contract calls for the company to deliver 3,000 didge

> The Bartolotta Company had an overabsorbed overhead balance at year-end. The firm wrote off one-third of it to Cost of Goods Sold, thereby raising net income by $100,000, and the remainder was charged to inventory accounts. Overhead is allocated to produ

> News.com is a Web site that offers users access to current national and international news stories. News.com does not charge users a fee for accessing the site, but rather charges advertisers $0.05 per hit to the Web site. A “hit” is a user that logs on

> The coating department of a parts manufacturing department coats various parts with an antirust, zinc based material. The parts to be processed are loaded into baskets; the baskets are passed through a coating machine that dips the parts into the zinc so

> A new pharmaceutical drug calls for 4.5 ounces of compound AN7-X1 per batch of 250 tablets. AN7- X1 has a standard price of $2 per ounce. An initial inventory of 8,000 ounces of AN7-X1 is purchased for $17,200. The firm produces 1,000 batches of the new

> The MRI department at Community Hospital, a large urban health center, performs magnetic resonance imaging for heart disease, brain disorders, and total body scans for the various patient care units (neurology, cardiovascular, OB/GYN, oncology, and so fo

> Prior to the Securities Acts of 1933 and 1934, corporations with publicly traded stock were not required to issue financial statements, yet many voluntarily issued income statements and balance sheets. Discuss the advantages and disadvantages of such vol

> Mickles Ltd. uses a standard cost system. In June, Mickles’ direct labor efficiency variance was $1,470 U and its direct labor rate variance was $825 F. Mickles manufactured 460 batches of product in June. Actual direct labor hours in June were 980 hours

> Zipp Cards buys baseball cards in bulk from the companies that produce them. Zipp buys sheets of 48 cards, then cuts the sheets into individual cards, and sorts and packages them, usually by team. Zipp then sells the packages to large discount stores. Th

> Diagnostic Imaging & Medical (DIM) has introduced a revolutionary new magnetic resonance imaging (MRI) device that it sells to hospital radiology departments. Their new device has a much larger chamber that reduces patients’ claustr

> Pool Scrubbers manufactures three different models of swimming pool cleaners (710, 720, and 830). These are sophisticated computer-controlled, programmed cleaners that scrub and vacuum the pool’s bottom, walls, and steps and provide supplemental filtrati

> Joanna Wu manages the University Lab Testing department within the University Hospital. Lab Testing, a profit center, performs most of the standard medical tests (such as blood tests) for other university clinical care units as well as for outside health

4.99

See Answer