Question: The Redwood City plant of Crimson Components
The Redwood City plant of Crimson Components Company makes two types of rotators for automobile engines: R361 and R572. The old cost accounting system at the plant traced support costs to four cost pools:
Pool S1 included service activity costs related to setups, production scheduling, plant administration, janitorial services, materials handling, and shipping. Pool S2 included activity costs related to machine maintenance and repair, rent, insurance, power, and utilities. Pools P1 and P2 included supervisors’ wages, idle time, and indirect materials for the two production departments, casting and machining, respectively.
The old accounting system allocated support costs in pools S1 and S2 to the two production departments using direct labor cost and machine hours, respectively, as the cost drivers. Then the accumulated support costs in pools P1 and P2 were applied to the products on the basis of direct labor hours. A separate rate was determined for each of the two production departments. The direct labor wage rate is $15 per hour in casting and $18 per hour in machining.
Now the plant has implemented an activity-based costing system. The following table presents the amounts from the old cost pools that are traced to each of the new activity cost pools:
Setups for R572 are 50% more complex than those for R361; that is, each R572 setup takes 1.5 times as long as one R361 setup.
Required
(a) Determine the product costs per unit using the old system. Show all intermediate steps for allocations, including departmental cost driver rates and a breakdown of product costs into each of their components.
(b) Determine the product costs per unit using the new system.
(c) Explain the intuitive reason that the product costs differ under the two accounting systems. (d) What should Crimson Components do to improve the profitability of its Redwood City plant? Include marketing and product-related changes among your recommendations.
(e) Describe how experienced production and sales managers are likely to react to the new product costs.
Transcribed Image Text:
COST POOL SUPPORT COSTS COST DRIVER S1 S2 $1,176,000 1,120,000 480,000 780,000 $3,556,000 Direct labor cost Machine hours P1 P2
> Saunders Company has recently become aware of the large total discounts on its orders and would like to know the impact on profit. The company computed its operating profit as follows: Required (a) Suppose Saunders could reduce its sales discounts to p
> Refer to the pricing waterfall chart in Exhibit 6-4. Required (a) What circumstances result in firms often failing to be aware of all of the discounts and allowances granted on a customer order? (b) Once a firm becomes aware of pricing waterfalls leadin
> For each of the categories below, provide a specific example of how a company might transform its breakeven or loss customers into profitable ones: a. Process improvements b. Activity-based (menu-based) pricing c. Managed customer relationships d. Discip
> Wright Company, a new systems consulting company, is concerned about the profitability of its customers during the past year. The company has prepared the following data: Required (a) Prepare a whale curve, as described in this chapter. (b) What percen
> Consider the operation of a fast-food company with hundreds of retail outlets scattered about the country. Consider the descriptions of management accounting provided in the chapter to identify management accounting information needs for the following: a
> Tetra Company’s cost system assigns MSDA expenses to customers using a rate of 33% of sales revenue. The new controller has discovered that Tetra’s customers differ greatly in their ordering patterns and interaction w
> Stan’s, a department store chain, has conducted a survey to collect data on customer satisfaction and perception of its merchandise and service. Data for responses to the question “How likely is it that you would recom
> Compute the customer lifetime value for Customer 421 based on the data below for the first six years of the customer relationship. Costs (ct) were incurred to promote customer retention to a rate of 0.8 in years 1 through 6.
> In response to how the sales incentives might be contributing to falling profits despite growing sales, Chan Company’s controller has produced the following information on last year’s sales to two customers that purcha
> Read the Wall Street Journal article “Survival Strategies: After Cost Cutting, Companies Turn toward Price Increases” by Timothy Aeppel (September 18, 2002, p. A1). The article reports “an all-out search for new ways to charge more money without raising
> Why might an organization not experience financial improvement even after using activity-based costing to identify and take action on promising opportunities for process improvements and cost reductions?
> Why do companies producing a varied and complex mix of products have higher costs than companies producing only a narrow range of products?
> “When a company produces both high volume products and low-volume products, traditional product costing systems are likely to over cost high-volume products.” Do you agree with this statement? Explain.
> Under what two conditions are volume based traditional product costing systems most likely to distort product costs? How do activity-based costing systems provide more accurate costs when these two conditions hold?
> Why are traditional volume-based cost allocation systems likely to systematically distort product costs?
> The decline in our profits has become intolerable. The severe price cutting in pumps has dropped our pre-tax margin to less than 2%, far below our historical 15% margins. Fortunately, our competitors are overlooking the opportunities for profit in flow c
> What advantages does time-driven ABC have over original activity-based costing?
> Why might individuals resist implementation of activity-based costing?
> What are some special considerations in the design of cost accounting systems for service organizations?
> Why are service organizations often ideally suited for activity-based costing?
> Why is practical capacity recommended in calculating capacity cost rates?
> How the information from an activity can based costing system guide improvements in operations and decisions about products and customers?
> What two sets of parameters must be estimated in time-driven ABC?
> How is a time-driven ABC system updated as resource costs increase or changes in operations occur?
> Riverdale Bone and Joint Surgery specializes in treating injuries related to bones and joints, as well as surgeries such as knee replacements and hip replacements. In addition to performing surgeries, Riverdale offers post-operation treatment. Riverdale
> Garber Company uses a traditional activity-based costing system to assign $600,000 of committed resource costs for customer service on the basis of the following information gathered from interviews with customer service personnel: Required (a) Compute
> For each of the following products, suggest three measures of quality: a. Television set b. University course c. Meal in an exclusive restaurant d. Carryout meal from a restaurant e. Container of milk f. Visit to the doctor g. Trip on an airplane h. Pair
> XZ Discount Brokerage is trying to determine the cost of supplying computing resources in order to determine how much to charge for trades. The company’s cost analyst is perplexed because XZ has acquired 80 servers to meet peak capacity needs, which occu
> Suppose an organization has not implemented either activity-based costing or a Balanced Scorecard but believes both would be valuable for the organization. However, management is currently willing to undertake only one major change initiative. Advise man
> Explain how an activity-based costing model can be linked to a Balanced Scorecard approach.
> Refer to the time-driven ABC analysis of forecasting resource capacity for the Madison Dairy ice cream plant example on pages 181–184 of this chapter. Suppose that all the information is the same except for the following: Required (a)
> CAN Company sells multiple products and uses a time-driven ABC system. The company’s products must be wrapped individually before shipping. The packaging and shipping department employs 24 people. Each person works 20 days per month on average. Employees
> Zeta Department Store has developed the following information in order to develop a time driven ABC model for its Accounts Receivable Department: The time to process payments of customer invoices depends on whether the customer pays the bill manually or
> (Adapted from CMA, June 1992) Alaire Corporation manufactures several different types of printed-circuit boards; however, two of the boards account for the majority of the company’s sales. The first of these boards, a TV circuit board,
> The Manhattan Company manufactures two models of compact disc players: a deluxe model and a regular model. The company has manufactured the regular model for years; the deluxe model was introduced recently to tap a new segment of the market. Since the in
> At its manufacturing plant in Duluth, Minnesota, Endo Electronics Company manufactures two products, X21 and Y37. For many years, the company has used a simple plant wide manufacturing support cost rate based on direct labor hours. A new plant accountant
> Smithers, Inc., manufactures and sells a wide variety of consumer products. The products are viewed as sufficiently profitable, but recently some product-line managers have complained about the charges for the call center that handles phone calls from cu
> Organizations in the public and nonprofit sector, such as government agencies and charitable social service entities, have financial systems that budget expenses and monitor and control actual spending. Explain why these organizations should consider dev
> (Adapted from CMA, December 1990) Moss Manufacturing has just completed a major change in its quality control (QC) process. Previously, products had been reviewed by QC inspectors at the end of each major process, and the company’s 10 Q
> Refer to the time-driven ABC analysis of the Madison Dairy ice cream plant example in the chapter. Required (a) Suppose indirect labor costs have increased by 10% from the original setting but all other information remains the same. Determine the total
> Potter Corporation has gained considerable market share in recent years for its specialty, low volume, complex line of products, but the gain has been offset by a loss in market share for its high-volume, simple line of products. This has resulted in a n
> Ken’s Cornerspot, a popular university eatery in a competitive market, has seating and staff capacity to serve about 600 lunch customers every day. For the past two months, demand has fallen from its previous near-capacity level. Concerned about his decl
> Halifax Brass Company manufactures pumps and valves and uses a time-driven activity-based cost (TDABC) system. Last year, Halifax recorded the following data for assigning manufacturing overhead costs to its products: Halifax also developed the followin
> The mayor of Gotham City is dissatisfied with the rising costs and deteriorating quality of the services provided by the city’s municipal workers, particularly in the transportation department: paving roads, repairing potholes, and cleaning the streets.
> Consider the case of the Cott Corporation, a Canadian private-label producer of high-quality cola beverages. Cott is attempting to get grocery retailers to stock its cola beverages as a lower price alternative to the more well-known brands of Coca-Cola a
> An article in the Wall Street Journal by Neal Templin and Joseph B. White (June 23, 1993) reported on the major changes occurring at General Motors. Its new chief executive officer, John Smith, had been installed after the board of directors requested th
> Towerton Financial Services13 Towerton Financial Services, a brokerage firm, started with a focus on stock trading and mutual funds. As the business grew, Towerton diversified into two new product lines, investment account management and financial plann
> Sippican Corporation (B)12 Refer to Case 5-36, the Sippican Corporation (A) case, which required time-drivenABC analysis. Sippican’s senior executive committee met to consider the implications from its time-driven ABC model. Frankly al
> The manager of a large semiconductor production department expressed his disdain for the cost information he was presently given: Cost variances are useless to me.2 I don’t want to ever have to look at a cost variance, monthly or weekly. Daily, I look at
> How is overhead cost estimated for individual jobs?
> How are indirect cost rates determined?
> What are predetermined indirect cost rates commonly called in practice?
> Provide several examples of cost objects.
> What does the term conversion costs mean?
> What are indirect cost pools?
> Define direct cost and indirect cost and provide an example of each.
> Compare the defining characteristic and cost behavior of a consumable (flexible) resource to those of a capacity-related resource.
> How do the cost flows in a retail organization or service organization differ from those in a manufacturing organization?
> Refer to the Madison Dairy ice cream plant example described in this chapter. Required (a) Suppose that production-related computer resource expenses of $18,000 per month have been inadvertently overlooked for inclusion in the cost system. Explain how t
> Describe the flow of costs from raw materials to cost of goods sold in a manufacturing organization.
> (Appendix) What is the difference between production departments and service departments?
> What are the similarities and differences between job order costing and multistage process costing systems?
> What is the basic procedure for determining product costs in continuous processing plants?
> How is practical capacity computed for machines and labor?
> How might computing the cost driver rate by using the planned level of the cost driver lead to a death spiral?
> What are the three options for dealing with the difference between actual and applied capacity (overhead) costs?
> “Use of a single cost driver rate when an indirect cost pool includes costs that have different cost drivers (causes of costs) leads to distortions in job costs.” Do you agree with this statement? Explain.
> Why are predetermined cost driver rates used when recording job costs?
> What problem arises when cost driver rates are based on planned or actual short-term usage?
> Provide several examples of the differences between high- and low-cost-to-serve customers.
> When do organizations use profit centers?
> Why do firms use multiple indirect cost pools?
> Why are costs estimated for individual jobs?
> In the context of computing a predetermined indirect cost rate, what is a cost driver?
> What has increased the need for cost systems that accurately deal with indirect manufacturing costs?
> Airport Coach Service Company operates scheduled coach service from Boston’s Logan Airport to downtown Boston and to Cambridge. A common scheduling service center at the airport is responsible for ticketing and customer service for both
> The Leblanc Company employs a job order costing system to account for its costs. The company has three production departments. Separate departmental cost driver rates are employed because the demand for overhead resources for the three departments is ver
> The Hillman Company sells and services lawn mowers, snow blowers, and other equipment. The service department uses a job order cost system to determine the cost of each job, such as oil changes, tune-ups, and repairs. The department assigns conversion co
> Hoyt Company uses a plantwide cost driver rate with machine hours as the cost driver. At the beginning of last year, Hoyt Company estimated its capacity-related (overhead) costs as $15,000,000 for a practical capacity of 100,000 machine hours per year. D
> Sherman Company manufactures and sells small pumps made to customer specifications. It has two service departments and two production departments. Data on current year operations follow: Management allocates maintenance department costs using machine ho
> Boston Box Company has two service departments, maintenance and grounds, and two production departments, fabricating and assembly. Management has decided to allocate maintenance costs on the basis of machine hours used by the departments and grounds cost
> John Malone, general manager of Midwest Office Products (MOP), was concerned about the financial results for calendar year 2003. Despite a sales increase from the prior year, the company had just suffered the first loss in its history (see summary income
> Sanders Manufacturing Company produces electronic components on a job order basis. Most business is gained through bidding on jobs. Most firms competing with Sanders bid full cost plus a 30% markup. Recently, with the expectation of gaining more sales, S
> The information below pertains to October production at Zippy Company’s bottling plant, which produces and bottles sports drinks. Each unit consists of a case of 12 bottles: Required (a) Using the weighted-average method, determine th
> Connor Chemical Company’s plant processes batches of organic chemical products through three stages after starting with raw materials: (1) Mixing and blending, (2) Reaction chamber, and (3) Pulverizing and packing. Connor Chemical&ac
> The Gonzalez Company uses a job order costing system at its plant in Green Bay, Wisconsin. The plant has a machining department and a finishing department. The company uses two cost driver rates for allocating manufacturing overhead costs to job orders:
> Bravo Steel Company supplies 8structural steel products to the construction industry. Its plant has three production departments: cutting, grinding, and drilling. The estimated overhead cost and practical capacity direct labor hours and machine hours for
> Modern Metalworks Company has two departments, milling and assembly. The company uses a job costing system with a plantwide cost driver rate that is computed by dividing plantwide overhead costs by total plantwide practical capacity direct labor hours. T
> Calla Manufacturing Company has 40 machines in its factory. The machines run for two shifts each day, with 30 workers per shift. Allowing for machine maintenance and break time for machine operators, each machine can be used for production for an average
> The information below pertains to July production at Porter Company’s paint factory, which produces paints for household interiors: Using the weighted-average method, determine the number of equivalent units of production for materials
> Mackenzie Consulting computes the cost of each consulting engagement by adding a portion of firmwide overhead costs to the labor cost of the consultants on the engagement. The overhead costs are assigned to each consulting engagement using a cost driver
> Kappa Company runs two shifts each day. Workers on average have four weeks off per year and after training and breaks, average 34 hours per week. What is Kappa’s practical capacity number of labor hours per year?
> AU.S. automobile components plant had recently been reorganized so that quality and employee teamwork were to be the guiding principles for all managers and workers. One production worker described the difference: In the old production environment, we we
> The following costs pertain to job 923 at Becker Auto Shop. Determine the total cost for job 923. QUANITITY PRICE Direct materials: Engine oil 11 ounces $2 per ounce Lubricant 3 per ounce 15 per hour 2 ounces Direct labor 3 hours Overhead costs (ba
> Ernie’s Electronics, Inc., delivered 1,000 custom-designed computer monitors to its customer, Video Shack. The following cost information was compiled in connection with this order: Direct Materials Used Part A327: 1 unit costing $60 per monitor Part B1
> Famous Flange Company manufactures a variety of special flanges for numerous customers. Annual capacity-related (manufacturing overhead) costs are $4,000,000 and the practical capacity level of machine hours is 120,000. The company uses planned machine h
> Ming Company has two service departments (S1 and S2) and two production departments (P1 and P2). Last year, directly identified overhead costs were $300,000 for S1 and $300,000 for S2. Information on the consumption of their services follows: Required (
> Carleton Company has two service departments and two production departments. Information on annual manufacturing overhead costs and cost drivers follows: The company allocates service department costs using the sequential method. First, S1 costs are all
> San Rafael Company has two production departments, assembly and finishing, and two service departments, machine setup and inspection. Machine setup costs are allocated on the basis of number of setups, whereas inspection costs are allocated on the basis
> Pitman Chemical Company manufactures and sells Goody, a product that sells for $10 per pound. The manufacturing process also yields 1 pound of a waste product, called Baddy, in the production of every 10 pounds of Goody. Disposal of the waste product cos
